Fixing guttering to log lap

[Andrew1]

Hi need some quick advice on the following please.
My new workshop is clad in 22mm log lap. I now need to fix the guttering to the front and rear. The gutter brackets will go vertically across the log lap curve. How do i secure the bracket without skewing the bracket up or down, dependant on where on the curve it affixes as i work my way along the workshop. Obviously fixing to a flat surface doesnt encounter this problem normally

 

[That would work]

Unless I've read this wrong... either
1. Make a wooden block to match the profile of the log and fix through that.
2. Use a steel bracket and bend it to fit the logs profile.

 

[Andrew1]

Hi thanks for coming back. Plastic brackets already bought, think wooden block seems the logical choice

 

[nev]

fix a 4x1 or similar fascia board and fix it to that?

 

[MikeG.]

I'd love to see your eaves detail. There are very few rooves where guttering fixes to the wall, rather than to rafter feet or fascias. I've certainly never seen it on a shed, or other timber building (it's normally associated with stone buildings such as those in the Peak District). Before seeing the eaves I'd be rather worried about a building without any eaves overhang.

 

[Shaggy]

When I built my shed two years ago, I screwed some blocks of wood to the rafters where they over hang the walls and fixed the guttering to them.

 

[Andrew1]

Thanks for coming back, think i will fix the blocks as suggested