Finishing issue

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Democritus

Established Member
UKW Supporter
Joined
8 Jun 2020
Messages
485
Reaction score
169
Location
Ramsbottom
Hi Guys

Can clear spray lacquer be used on a bowl previously finished with a wax polish? I don’t want to start stripping everything back if I can avoid it.
D.
 
If you've got wax under a finish it's not going to stick. If it doesn't come up with fish eyes with the first coat I would be surprised. You could try rubbing hard with an acetone soaked cloth and scotch pad which might give you enough raw wood for the laquer to stick to. A thin shellac sealer coat might help things. One of the nice things about using wax is that virtually nothing sticks to it!!
Cheers
Andrew
 
Nothing goes on top of wax except for another wax.
Chestnut Compatibility Chart attached.
 

Attachments

  • - Chestnut Compatibility Chart.pdf
    20.7 KB
I have seen mention of sanding sealers and lacquers adhering to wax because the solvents in the lacquer etc. dissolves the wax so you end up with a single layer of both wax and lacquer combined. The official line is that you shouldn't do it but it might be worth a try. I know where I apply sanding sealer over a section next to an area alread sealed and waxed there doesn't seem to be any adverse effects.
 
Hard wax can certainly be overcoated with shellac, I have been doing it for years.
Wax polish I think ought to be removed as best you can for a long lasting finish. Anything containing silicone should be avoided like the plague.
 
Back
Top