Festool router guide rail clamp and Trend T11 router

[Popey]

Does anybody know whether the Festool FF-OF-1000 guide rail clamp would work with a Trend T11 router? Would any owners mind telling me the distance between centres on the clamp and the diameter of the guide rods.

thanks very much.

Mark

 

[petermillard]

Yes it does. I have a sub base on my T11 which is why it looks a little lumpy, but the base of the Festool guide lines up with the standard base of the T11. Standard rails fit right in - maybe a teensy bit tight when all the way home, but nothing forced. Rods are 8mm dia. 115mm between the extremes. HTH. P

 

[Popey]

Yes it does. I have a sub base on my T11 which is why it looks a little lumpy, but the base of the Festool guide lines up with the standard base of the T11. Standard rails fit right in - maybe a teensy bit tight when all the way home, but nothing forced. Rods are 8mm dia. 115mm between the extremes. HTH. PView attachment 103975
View attachment 103976
View attachment 103977
View attachment 103978
View attachment 103979

Peter,
that's really useful. Thank you very much.

Best wishes,

Mark