Elektra beckum hc260 help

[Aylest94]

Hi all,


After some advice. I have just picked up and elektra beckum hc260 planer thicknesser. I can't seem to adjust the infeed table. I can twist the adjustment knob to a certain point but the table does not move. I can back the adjuster all the way out but the table itself does not allow to go in past a certain point. There is no movement in the table at all. It is a blue machine that says metabo on it if it's makes much difference. Any ideas before I take it apart?


Thanks in advance.

Tom

 

[MorrisWoodman12]

I'm afraid I do not have any real advice but I took my green HC260 infeed table off and got it back without any issues. It's a pretty simple assembly really. I'm sure you will be able to manage it if you have reasonable mechanical skills.
Good luck.
Martin

 

[Aylest94]

Thanks for this, turns out easy fix, took the tables off, cleaned and put some PTFE on the contacts and sorted.