Dalboy
Established Member
Has anyone got the 2 1/2" dust extractor set up if so can you tell me if the pipe work is 2 1/2" internal or external diameter
Dust extraction
- Thread starter Dalboy
- Start date
Help Support UKworkshop.co.uk:
NikNak
Established Member
yes i've got it....
2 1/2" external on pipes
2 1/2" internal on fittings/junctions etc
Nick
2 1/2" external on pipes
2 1/2" internal on fittings/junctions etc
Nick
chipmunk
Established Member
Which version; Camvac, Axi... etc?
I'd be a bit careful as some is 63mm rather than 2 1/2" if you're making buying bits to fit together.
HTH
Jon
I'd be a bit careful as some is 63mm rather than 2 1/2" if you're making buying bits to fit together.
HTH
Jon
Dalboy
Established Member
Thanks guys it was just that I have a length of down pipe that is 2 1/2" inside diameter which I am looking at using on the lathe
