sawdustjon
Established Member
I am a hobby woodturner and I am always up for a bargain. Last year I bought an extractor unit with 1 metre pipe. This was inadequate so for my small workshop (95mx3.5m) so I ran 100mm around just above bench height made from cardboard carpet liner, which is free to any-one who cares to call at the carpet shop. The joints are mitred (90 degree and 'T' joints) and the gates are made from ply, the joints are glued with 'no nails' and so far they have served me well. As a precaution (because I didnt know if it was necerssery) I ran an earth cable through as I was constucting it and earthed it against static.