Do Concealed Kitchen Hinges For 25mm Thick Doors Exist?

[Stevie B]

Hi Guys
I'm just making a built in cupboard and for the doors I want to lay 9mm mdf over 15mm mdf to create a shaker style door that'll hopefully be a bit stronger than laying 9mm over 9mm which is what I usually do and very often the doors end up bowing which is very annoying.
I usually use the standard blum inset or overlay concelaed kitchen hinges but I don't think they will work with 25mm ish thick doors so do you guys know of any that do?
The doors will be overlay just like a kitchen unit and will have a side trim on each side which will be the same thickness as the doors so it all runs flush into the walls.
Any ideas or other hinges that I could use would would be greatly appreciated.
Thanks

 

[Chrispy]

Yes you can get hinges for that, but there's a lot of different options to consider, you need to study the catalogue.

 

[skipdiver]

As chrispy says, you need to work it out for yourself from the catalogue, choosing the right hinge and backplate.

 

[RobinBHM]

When I do wardrobe doors, I always use concealed hinges.

The Hafele hinges I use work fine with 25mm thick doors. I use them in an inset application as the doors sit in a face frame, but I think they still work as an overlay.

Ill check the part nos and add to thread tomorrow

 

[petermillard]

Hi Guys
...I want to lay 9mm mdf over 15mm mdf to create a shaker style door that'll hopefully be a bit stronger than laying 9mm over 9mm which is what I usually do and very often the doors end up bowing which is very annoying....
Thanks

If that's how you want to make them then why not use 9mm/12mm or 6mm/15mm to make a 21mm door and use standard Blum hinges?

Or just use 22mm MR MDF for the rails and stiles and groove them for whatever panel thickness you want - it's not difficult.

Pete

 

[Stevie B]

Hi guys
Thanks for your replies so far, I assume you're talking about the blum catalogue?
I did look on their website but didn't get very far but I've just looked again and seen a tiny little link to 'catalogue' right at the bottom of the homepage so I'll have a look through that. It would help if it was a little more prominent but never mind.
Thanks again

 

[RobinBHM]

These hinges are the ones I used

http://www.hafele.co.uk/shop/Products.a ... g_id=22751

 

[Doug71]

I sometimes use http://www.trade-hinges.co.uk for blum hinges, their website normally makes it easy to find what you want.

http://www.trade-hinges.co.uk/soft-clos ... -109-p.asp

Doug