Do any Titan TTB794MSW mitre saw accessories exist?

[ziplock9000]

I was wondering if there are any 1st or 3rd party accessories for my Titan TTB794MSW mitre saw?
I notice the fence is detachable and wondered if there was a better one I can buy rather than having to drill holes in the one I have to add a sacrificial fence.
Also the floor plate is detachable and wondered if there was a zero clearance one available as I very rarely cut mitres.
Any other accessories too..

I've googled a few times and can't find any 1st or 3rd party accessories, which is a shame.

https://www.screwfix.com/p/titan-ttb794msw-210mm-electric-single-bevel-sliding-mitre-saw-240v/881kp

 

[Bodger_bill]

See my post https://www.ukworkshop.co.uk/threads/auxilliary-fence-for-mitre-saw.151034/
I noticed that Ooznest supply cast right angled brackets that you could use with their section to make your own fence. I'm not sure if they would be large enough to give the stability you would be looking for. If you could make it work then you could potentially end up with a replacement fence of any length you desired....a better solution perhaps than an auxilliary fence. The aluminium section they supply is of very high quality.

 

[ziplock9000]

See my post https://www.ukworkshop.co.uk/threads/auxilliary-fence-for-mitre-saw.151034/
I noticed that Ooznest supply cast right angled brackets that you could use with their section to make your own fence. I'm not sure if they would be large enough to give the stability you would be looking for. If you could make it work then you could potentially end up with a replacement fence of any length you desired....a better solution perhaps than an auxilliary fence. The aluminium section they supply is of very high quality.

Unfortunately, the standard fence with this saw does not have any holes in it for bolts to go through. Which I think this fence needs to put T bolts through.
Though obviously I could drill some if need be. Standard extrusion, nice. I'll take a look thanks.

Accessories in general, I decided to design, make and sell a Zero Clearance Throat Plate myself as I seen nobody else doing it. Although I assume it's not allowed to link here, but should turn up in searches.