Dewalt DW125 Radial Arm Saw -
I had a bit of a hurried (deadlined) attempt to sell this some time back, and then it got forgotten when I had more time, but im getting around to things again, so here goes -
DW125 (which, so far as I've ever been able to tell, is the same as the 1251)
Nice condition (aside from the cosmetic spatter that is evident in the photo!). Still with the guards etc. I can not currently locate the little anti-kick back finger things (supposed to be a safety thing when ripping) - im not sure i ever used them, and virtually all saws you see for sale also have them removed, but its irritating as i do (did) have them somewhere. The only other known fault is power cable has a little metal stand thing that fits into a hole in the plastic, and the hole is worn so the stand thing falls out. This is so minor, but i mention it for completeness.
Price is GBP 140, which i think is probably fair.
I'm trying to generate space more than anything else. They are nice saws. The 300tdi coolant hose will be free! : ) It couples the strange shaped dewalt dust port to a henry (etc) nicely.
I am in Devon, about 20-25mins easy drive (white lines down the middle of the road the whole way) from J27 of the M5. I think there's probably only about 5 junctions between the motorway and our home.
Axminster AW106PT Planer Thicknesser -
I'm also going to be selling my Axminster AW106PT but ive not got photos of that (yet).
That all works as it should. The (round) plastic bezel on one of the start / stop buttons is cracked, and the paint work is chipped etc. but we are talking cosmetics.
The blades will, undoubtedly, be chipped / blunt, but fresh sets are not big money. Ive got a few (probably) sets of old blades, but have found it cheaper to buy fresh blades than to get them re-ground anyway. Any buyer would be welcome to all that i have.
...and, yes, i still have not finished the Wadkin BAO/S, but, again, i have desires of more space.
I think a price of GBP 490 is realistic.
Thank you.
I had a bit of a hurried (deadlined) attempt to sell this some time back, and then it got forgotten when I had more time, but im getting around to things again, so here goes -
DW125 (which, so far as I've ever been able to tell, is the same as the 1251)
Nice condition (aside from the cosmetic spatter that is evident in the photo!). Still with the guards etc. I can not currently locate the little anti-kick back finger things (supposed to be a safety thing when ripping) - im not sure i ever used them, and virtually all saws you see for sale also have them removed, but its irritating as i do (did) have them somewhere. The only other known fault is power cable has a little metal stand thing that fits into a hole in the plastic, and the hole is worn so the stand thing falls out. This is so minor, but i mention it for completeness.
Price is GBP 140, which i think is probably fair.
I'm trying to generate space more than anything else. They are nice saws. The 300tdi coolant hose will be free! : ) It couples the strange shaped dewalt dust port to a henry (etc) nicely.
I am in Devon, about 20-25mins easy drive (white lines down the middle of the road the whole way) from J27 of the M5. I think there's probably only about 5 junctions between the motorway and our home.
Axminster AW106PT Planer Thicknesser -
I'm also going to be selling my Axminster AW106PT but ive not got photos of that (yet).
That all works as it should. The (round) plastic bezel on one of the start / stop buttons is cracked, and the paint work is chipped etc. but we are talking cosmetics.
The blades will, undoubtedly, be chipped / blunt, but fresh sets are not big money. Ive got a few (probably) sets of old blades, but have found it cheaper to buy fresh blades than to get them re-ground anyway. Any buyer would be welcome to all that i have.
...and, yes, i still have not finished the Wadkin BAO/S, but, again, i have desires of more space.
I think a price of GBP 490 is realistic.
Thank you.
