collet for ferm router

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jamie64

Member
Joined
28 May 2014
Messages
5
Reaction score
0
Location
NOTTINGHAM
I have been given a 1/4 inch ferm router but it doesent have a collet or the nut with it .does anybody know if i could use a collet off another brand of router.thanks in advance jamie,
 
I have a broken Ferm router. You would be welcome to have its nut and collets FOC. I think the collets are 6mm, 1/4" and 8mm.
 
Jamie63, I would edit your post it's not good to put your address up on an open forum, and you now have enough posts (3) to PM.

Pete
 
+1
Yes Jamie, I have noted the address and will send the parts tomorrow so please edit your post as Pete suggests.
 

Latest posts

Back
Top