chisels
- Thread starter paulc
- Start date
Help Support UKworkshop.co.uk:
sawdustalley
Established Member
Depends, what are you planning on using them for.
You can get:
-Standard Bevel Edge Chisels
- Fine, Cabinet making ones (Kirchen, Robert Sorby)
- japanese chisels
To name a few...
You can get:
-Standard Bevel Edge Chisels
- Fine, Cabinet making ones (Kirchen, Robert Sorby)
- japanese chisels
To name a few...
A
Anonymous
Guest
If its standard bevel edged chisels i like marples i've had mine for nearly 20 years
trevtheturner
Established Member
Pualc,
I agree with A.P. A set of Marples will do you okay for general use - but don't look in the Axminster catalogue or you might get confused!
Trevtheturner.
I agree with A.P. A set of Marples will do you okay for general use - but don't look in the Axminster catalogue or you might get confused!
Trevtheturner.
sawdustalley
Established Member
Thats what happened to me :shock: :? :!: :!: :!:
Yes I would agree on the marples bit, if you want some good quality, general use chisels, that will last a while, stand up to a few - and work well on site aswell as in the workshop - they should be prefect!
If you plan to do alot of *fine joinery* then you might want to look at a set of cabinet makers, or even japanese chisels, which can be very accurate, and be sharpened to a high degree, holding the sharp edge.
Yes I would agree on the marples bit, if you want some good quality, general use chisels, that will last a while, stand up to a few - and work well on site aswell as in the workshop - they should be prefect!
If you plan to do alot of *fine joinery* then you might want to look at a set of cabinet makers, or even japanese chisels, which can be very accurate, and be sharpened to a high degree, holding the sharp edge.
Charley
Established Member
I've got some Robert Sorby bevel edge chisels, they are very nice and I hope will last a long time.
Gill's right about sharpening. You can buy the most expensive chisels on the market but you still need a good method of getting (and keeping) them sharp. My <gloat>Tormek machine</gloat> can even make my cheapie record chisels perform excellent
Gill's right about sharpening. You can buy the most expensive chisels on the market but you still need a good method of getting (and keeping) them sharp. My <gloat>Tormek machine</gloat> can even make my cheapie record chisels perform excellent
morrisminordriver
Established Member
There was a good review of chisels in the Sept(?) edition of Furniture and Cabinet making magazine with the Kirschen (Two Cheries) chisels coming out on top. They are available from Axminster for around £56 for the set of six - with grduated wooden handles and polished backs to the blades I reckon thats good value!.
They followed this up in the next edition with a further article on what constitutes good blades etc - very useful stuff!.
(Im not connected with Kirschen or Axminster BTW).
Regards MMD.
They followed this up in the next edition with a further article on what constitutes good blades etc - very useful stuff!.
(Im not connected with Kirschen or Axminster BTW).
Regards MMD.
