Chess board oil finish??

[Thedog]

Hello,

From off cuts of a previous project I have made a chess board from Walnut and maple.

I want to apply a good fish to it that will look great without it being too glossy, a nice satin finish perhaps.
I would like to use an oil and not varnish. Something that can be applied easily.

Liberon's finishing oil looks really good. Maybe a few thin coats and the buffed off with some sort of finishing wax.

Any thoughts on this or any advice or suggestions of what would be good?

Also, would it be a good idea to apply a sanding sealer first. I have some acrylic spray sealer and some brush on shellac sealer as well.
Or would this just cause more problems?

Thanks

 

[AJBaker]

Nice project, care to share a picture?

I'm old fashioned, I would stick to linseed oil followed by paste wax. It looks great, is easy to apply, is non toxic, smells nice, and gives a nice satin finish (or some shine if you buff).
I don't think you need sealer, especially not for walnut and maple which are both diffuse porous woods.

 

[alex robinson]

Any of the drying oils would work, however some leave more of a colour than others. I prefer tung to linseed, as it causes less yellowing for pale woods like maple. Use a quick drying version though unless you are very patient!

 

[Blackswanwood]

Chestnut Hard Wax Oil is easy to apply, attractive and hardwearing. There is a choice of gloss or satin.

No need for a sealer.

 

[rob1693]

Peri of this parish makes beautiful chess boards look up some of his threads I'm sure he's tried lots of finishes

 

[Eshmiel]

Hello,

From off cuts of a previous project I have made a chess board from Walnut and maple.

I want to apply a good fish to it that will look great without it being too glossy, a nice satin finish perhaps.
I would like to use an oil and not varnish. Something that can be applied easily.

Liberon's finishing oil looks really good. Maybe a few thin coats and the buffed off with some sort of finishing wax.

Any thoughts on this or any advice or suggestions of what would be good?

Also, would it be a good idea to apply a sanding sealer first. I have some acrylic spray sealer and some brush on shellac sealer as well.
Or would this just cause more problems?

Thanks

Hello The,

Before the spoon and bowl-making obsession got a hadden of me, just over a year ago, my last piece of proper furniture was a small games table and what will be the first of various gaming boards, a chess/draughts board - in maple & walnut, what else? (With a cherry and black walnut surround, punctuated by black iron nails - gothic, like the rest o' the hoose ornaments).

It's finished in Liberon Finishing Oil - 3 coats rubbed on with a clean and lint-free piece of cotton sheet then buffed when dry with a very soft brush before application of one coat of Liberon neutral wax. This imparts a shine but it's muted by the paste wax to a degree. It's not the toughest finish but unless the chess becomes violent, that shouldnae matter, eh?