Axi CT1502 Jointer Knives

[jedmc571]

Hello,

Axminster charge £33 for these, does anyone know where I can get some cheaper.

Cheers

Jed

 

[9fingers]

Ask Cutting Solutions - a member here and in the other place.

Helpful and good pricing. Some stuff on line but sells much more

Bob

 

[cutting solutions]

Jed
I agree it does seem expensive.

I am not sure of the height and thickness of the knives for that machine. Does it have any slots for locating?

let me know and I can tell you how much
(for example standard plain 150x30x3 HSS Planers @ £4.41 each nett + post + VAT)
As fingers said not everything is shown on the web site as there is so much involved in tooling.
Doug

 

[gasman]

Hi Doug
Your website looks just the job
Can you tell me if you have blades which would fit a Makita 2012 thicknesser - I think they are 304mm long...
Thanks
Gasman

 

[cutting solutions]

Hi Doug
Your website looks just the job
Can you tell me if you have blades which would fit a Makita 2012 thicknesser - I think they are 304mm long...
Thanks
Gasman

Thanks gasman

i need to know the height and thickness of the blades.
there are so many machines I find it difficult to know all the sizes.
I can do 12" x 3/4" x 1/8"; 12" x 1" x 1/8"; 12" x 1 1 /8" x 1/8";
I have the 1" ones in stock.
Doug

 

[jedmc571]

fANTASTIC !

Not sure of the size, but will let you know soonest.

Cheers

Jed

Can you do Tablesaw blades 250mm x 30mm Bore ?

 

[cutting solutions]

I might get into trouble with the moderators here.
I hope not as I am very willing to give free advise to all. If I get a sale I would be very happy.

250 x 30 mm
Depends how many teeth and tooth configuration. Configuration depends on material being cut.
But most are available from stock.

 

[jedmc571]

Not sure about this, can't find anything online, and nothing in the manuals, I'd have to take one out to measure, unless anyone already knows?

Cheers

Jed

 

[Corset]

I would like to reccommend Cutting solution services. I have been frustrated with changing my sedgwick planer blades because I am lazy and a bit rubbish. He located a souce of indexable planer blades which allow you to change the blade in seconds. It is fantastic I cannot believe i did not get some sooner. The service was superb and if anybody is interested I am happy to put some pictures up.
The only down side is I had speculative punt on ebay and ended up with a bigger planer :roll:
So that will be up for sale with some lovely new shiny blades.
Owen

 

[RogerS]

I would like to reccommend Cutting solution services. I have been frustrated with changing my sedgwick planer blades because I am lazy and a bit rubbish. He located a souce of indexable planer blades which allow you to change the blade in seconds. It is fantastic I cannot believe i did not get some sooner. The service was superb and if anybody is interested I am happy to put some pictures up.
The only down side is I had speculative punt on ebay and ended up with a bigger planer :roll:
So that will be up for sale with some lovely new shiny blades.
Owen

I'd be interested in pictures. Which model Sedgwick is it?

 

[Corset]

It is the baby one I think the PT (a cast iron baby) I will be photographing tomorrow for its impending sale.
Ebay is the scourge of my life!

 

[got wood]

Hi Doug
Your website looks just the job
Can you tell me if you have blades which would fit a Makita 2012 thicknesser - I think they are 304mm long...
Thanks
Gasman

Hi mate, unfortunately, the makita 2012 takes double sided blades. They have a groove down the centre for aligning, and are reversible.

Cheers.
Jamie

 

[Digit]

I've got the Makita 2012 and the cost of Makita knives is *&^%$*** awful!
I converted mine to take DeWalt knives.

Roy.