A little while ago

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Chrispy

Established Member
Joined
10 Aug 2011
Messages
1,981
Reaction score
183
Location
Oxfordshire
A little while ago I asked about fence paint, well here is the fence. Made in Idigbo and finished with Os/color opaque white, two brush coats and then finished off with a spray coat, seems very good and dries hard very quickly. (hammer)

New Fence, Chris 001 (Small) (428x383).jpg

New Fence, Chris 002 (Small) (640x480).jpg

New Fence, Chris 022 (Small) (292x427).jpg
 

Attachments

  • New Fence, Chris 001 (Small) (428x383).jpg
    New Fence, Chris 001 (Small) (428x383).jpg
    133 KB
  • New Fence, Chris 002 (Small) (640x480).jpg
    New Fence, Chris 002 (Small) (640x480).jpg
    44.5 KB
  • New Fence, Chris 022 (Small) (292x427).jpg
    New Fence, Chris 022 (Small) (292x427).jpg
    90.2 KB
Nice..!!

and the added advantage is as they're not metal, they have a good chance of staying in place, not nicked for scrap metal....I daily expect to come home and find out my path gate's gone walkabout..... :evil:
 
Top Job. Environmentally friendly version of an "iron" fence and will last a lifetime if maintained properly with no rust :lol:
 
Alan Jones":33ksn426 said:
Did you do the mortices on a morticer with the chisel turned on the angle ?

Yes a 25mm square mortice chopped from both sides to avoid the split out. (hammer)

Thanks for looking. :D
 
Back
Top