- Joined
- 19 Mar 2007
- Messages
- 5,295
- Reaction score
- 411
As we are moving back to the U.K. fairly soon I thought that I would like to be able to give some of our freinds and neighbours a small gift? One of those friends gave me some wild cherry a while back and as it's such a lovely wood I thought that would be the ideal wood.
I was going to do 12 of them, but as one went BANG there are 11. As I went through the bottom of another there is now one of cherry/tulip tree too I also decided to do a couple in that lot for us and the one with the center in it is one of them.
Cherry bowls 5 by John, on Flickr
Cherry bowls 4 by John, on Flickr
It's not difficult cutting a taper out of the center, turning a tapered plug and fitting it. Just a bit of care that I didn't do a repeat and go throug h again :roll:
Cherry bowls 3 by John, on Flickr
And the difference between the non spalted and spalted is incredible
Cherry bowls 2 by John, on Flickr
They are about 4 1/2 to 5" and the logs cut to length and then in 1/2 down the heart and mounted on a screw chuck to turn the base. Then re mounted on my O'Donnel jaws and the top turned. It's lovely wood to turn and takes a very nice finish. I still have a couple of the logs left and they will be cut to length and packed to bring back with us. Well! They are much too good to burn!
I was going to do 12 of them, but as one went BANG there are 11. As I went through the bottom of another there is now one of cherry/tulip tree too I also decided to do a couple in that lot for us and the one with the center in it is one of them.
Cherry bowls 5 by John, on Flickr
Cherry bowls 4 by John, on Flickr
It's not difficult cutting a taper out of the center, turning a tapered plug and fitting it. Just a bit of care that I didn't do a repeat and go throug h again :roll:
Cherry bowls 3 by John, on Flickr
And the difference between the non spalted and spalted is incredible
Cherry bowls 2 by John, on Flickr
They are about 4 1/2 to 5" and the logs cut to length and then in 1/2 down the heart and mounted on a screw chuck to turn the base. Then re mounted on my O'Donnel jaws and the top turned. It's lovely wood to turn and takes a very nice finish. I still have a couple of the logs left and they will be cut to length and packed to bring back with us. Well! They are much too good to burn!