3 tpi!
- Thread starter GrahamRounce
- Start date
Help Support UKworkshop.co.uk:
Phil Pascoe
Established Member
woodbloke66
Established Member
Here as well - https://www.axminster.co.uk/axcaliber-g ... 3-ax931532 - Rob
Phil Pascoe
Established Member
Yet another post disappeared.
I don't think rereading that that the OP meant they were hard to find, just that he had only just come to using them.
I don't think rereading that that the OP meant they were hard to find, just that he had only just come to using them.
Yes, one's finger or part thereof wouldn't stand much of a chance!
Talking of never-to-be-repeated (touch wood, not blade, haha) accidents, see the enclosed finger?
The blade (6tpi) went almost through, along the line, before I ****** it back.
In strong denial, I put Savlon on a sticking plaster around it and carried on. After 2 or 3 days I dared to look at it, expecting the dangly bit to be blackened and horrible, but no: it was pure white!
So I put a new plaster etc on and made a paper tube to put over the whole finger so that it definitely couldn't get knocked. It made reaching for money difficult, but I persevered with it for a couple of months and eventually the finger became as you see it now: absolutely perfect!
I'd read before about finger amputations up to the first joint regrowing and mentioned it to my GP. He said that as long as the bone's not damaged, it should recover, which isn't quite the same, but wotever.
The moral of the story? You don't have to be that careful, only past the fingertip!
The blade (6tpi) went almost through, along the line, before I ****** it back.
In strong denial, I put Savlon on a sticking plaster around it and carried on. After 2 or 3 days I dared to look at it, expecting the dangly bit to be blackened and horrible, but no: it was pure white!
So I put a new plaster etc on and made a paper tube to put over the whole finger so that it definitely couldn't get knocked. It made reaching for money difficult, but I persevered with it for a couple of months and eventually the finger became as you see it now: absolutely perfect!
I'd read before about finger amputations up to the first joint regrowing and mentioned it to my GP. He said that as long as the bone's not damaged, it should recover, which isn't quite the same, but wotever.
The moral of the story? You don't have to be that careful, only past the fingertip!
Attachments
Simon_M
Established Member
Fortunate! A good "rule of thumb" is a minimum of three teeth in the workpiece for a good cut - otherwise it's a bit like smashing it with a hammer, so not a chance with 3tpi blade for your "attached" (enclosed) finger.GrahamRounce":4kbphkzv said:
Doug B
Shy Tot
I started using 2tpi blades from Ian just over a year ago fantastic for deep ripping.
