AJB Temple
Finely figured
New 2hp cyclone extractor arrives on Friday. Does anyone have any recommendations for a supplier of wall mounted ducting, blast gates etc. Metal versus plastic ducting? Any variation in quality?
System (machines may be re-arranged) will be:
1 Router table with 2.5" outlet I think
2 Disc sander with 2.5" outlet
3 PT with 100mm / 4 inch outlet
4 Bandsaw with 100mm outlet
5 Lathe, which will need some kind of hood
6 Table saw - on other side of workshop and system may need to use a flexible hose connector for that.
I am presuming that metal blast gates are best as they can be taken apart if they jam?
Can I use this system, via a dedicated blast gate, to extract power tools such as the belt sander?
I am presuming that I should not extract metal dust from the sharpening (sorby)/ polishing bench, due to spark ignition risk?
System (machines may be re-arranged) will be:
1 Router table with 2.5" outlet I think
2 Disc sander with 2.5" outlet
3 PT with 100mm / 4 inch outlet
4 Bandsaw with 100mm outlet
5 Lathe, which will need some kind of hood
6 Table saw - on other side of workshop and system may need to use a flexible hose connector for that.
I am presuming that metal blast gates are best as they can be taken apart if they jam?
Can I use this system, via a dedicated blast gate, to extract power tools such as the belt sander?
I am presuming that I should not extract metal dust from the sharpening (sorby)/ polishing bench, due to spark ignition risk?