Search results

I agree with you that an airshield does help but the problem is that most available dust extractors do not sperate the chips from the fine dust. I use a vacuum based mini cyclone for some of the hand tools ( dust creators) and a 3HP cyclone based system for the main shop extraction. All of the...

With the 63mm hose the fine dust is not collected as the flow rate is too low. You would have to wear a respirator. With 100mmm and a 2/3HP motor the rate is enough for a single/small double garage workshop with blastgates. With MDF most of the fine dust is 0.5micro is is not good for the lungs

Other than the dust below 2micros which is the most dangerous

A visit to the Bill Pentz site would have saved you all a lot of trouble. The 63mm option is just not good enough and with high volume chips 150mm is used. Most of the so called dust extractors (bagged option) are the biggest blowers of fine dust in the workshop. Cyclones( mini) attached to...

Chris. Mitre Bench 2 Episodes 2002 What is this called on E mule - I cannot find it Thanks barry

I have downloaded Delux Router table JigsII -Hinge/luvre/spaced holes/fingerjoint/circle jigs Jigs I - still downloading Router table -still downloading garage Workshop - appears to be sound only Table Saw - cannot get 50% of the file

I have been downloading from E Mule a number of the Norm's new yankee workshop shows. I have found the downloads very slow when compared to other downloads and a number have not been see complete. Two i have had to abandon as they would not complete. I have downloaded 3 but have 5 on the go at...

The templates will be both standard or you will be able to order custom templates for your use. An example is if you require to cut out the shape of the USA - the template will allow for it to be repeated many times - so they are a function of your imagination

See what Triton have done with their new Router http://www.grendels-lair.net/tritontools/data/files/data_sheet_MOF001KC.pdf

Can any member send me a copy of the manual showing the motor?

Now if they follow the same order 1701 2005 Arts and Crafts Style Hall Mirror 1702 2005 The Bermuda Bench/Table 1703 2005 The Ottoman 1704 2005 Bermuda Chest 1705 2005 Federal-Style Game Table 1706 2005 Lathe 101 1707 2005 Side Chair 1708 2005 Tilt Top Table...

I paid 34p 2 months ago but heating oil has risen since then.

How easy is it to change the motor on a Kity band saw.?? Is the part still available as the machine has been discontinued.

I use Link This is an adjustable hole cutter that I use for diameters less than 200mm. Be careful cutting a small dics with the Triton circle cutter and use the smallest bit you have. Mod edit to reduce URL length

This is another approach to the problem http://www.users.bigpond.com/bob.jager/triton_sled.htm

The Triton is not supported on the RAT. For the little RAT you have to modify the base. The plunge bar does not work at all.

It appears to be a show for builders in the main with very little woodworking -

Sorry it was me as I could see it with internet explorer I assumed HTML was set It was not fied thanks again for the good work

I can view the tables OK with internet explorer but not with Firefox.