Search results

Is there a list of who will be demonstrating at Yandles?? Thanks

Thanks John but as Scrit said there appears to be no stairs with just one side mounted stringer. There are walls on both sides one being a stud wall. The solid wall was built some time between 1760 and 1800 and is far from straight or level. Barry A stair novice

Its not irrelevant, the smaller diameter cyclones are increasing the airflow due to the tight turns of the cyclone so you are achieving better airflows. I am using 6" from the impellor to the cyclone and 4" air ramp into the cyclone and a 15" diameter cyclone with a 13.5" impellor. I am getting...

Hi Scrit, The left hand stringer is attached only to the ground floor and at the first floor. The left hand side is a stud wall from the top of the stringer to the first floor. The right hand side wall is by no means square and the stairs just follow the contour of the wall with stair lengths...

I have to repair or replace a flight of stairs in my daughters apartment in Paris. The original oak stairs are over 100years old and a single flight of 10 stairs. The stairs have a single "stringer" on the left and the right hand side is fixed stair by stair to the wall. The building was the...

The Bill Pentz's comments on the Burgess Cheapie

I have been having a discussion with the master him self - Bill Pentz replied to so comments about cyclone diameters on an Australian website http://www.woodworkforums.ubeaut.com.au/showthread.php?t=35734&page=5 He states that the smaller diameter cyclones down to 13.5" give better dust...

Having not gone to Yandles before, a simple question - Is it all under cover?? The weather is supposed to bucket down on Friday.

Andy I am just back from Paris and I will let you know tomorrow. It should be noon at the earliest. Barry i

Trying to get there for Friday as well - I am busy on Saturday at some place in Poole. Barry

Bluesman I let the teeth of the blade overhang the wheel by was 1/8" or less on both wheels. I them apply some tension to the blade and turn the blade twice by hand to see if it moves reverse the direct of turn if it has moved so as to re align it.- adjust the tilt . Try again. Repeat this...

Roger I think its down to the direction that the impellor rotates. Barry

With the US versions its better to buy with the impellor and without the motor. This is a better option as its made of perspex and the shipping is lower ClearVue http://www.clearvuecyclones.com/Order_Page.htm Even with this lighter version the shipping costs plus VAT plus import duty...

Scrit I tried all kinds of dust buckets before the extractor but they either collected nothing, if they were small and if too large caused a big drop in suction. If I had my time over on this project I would have used a airfoil but was worried how much dust would get into the airfoil but I...

Scrit the DIY extractors send too much of the dust to the top bag. This might be different with the commercial units but I found with my 3HP 4 bagger that the design was not ideal for separating the dust even if it was not fine. This excess of dust causes the bag to under perform and I suspect...

Ivan I am getting no visible dust going to the filter. Even if I use the palm of my hand and bang the filter. The dust and chips are remaining in the cyclone - far better than I ever thought. I am using a total of 40m2 with the two filters and totally agree with your comments on bags

Andy mine have not gone AWOL and my Firefox is set to auto update? Barry ps Just made a backup in case

Stev a quick translation Hotel the Relay of the Marsh Service of has *** hotel and the price of has ** hotel. Warm and decorated like the home of friends, this hotel offers friendly atmosphere, cosy comfort and easy access. The charm of old Paris in the Marsh district between Châtelet and the...

Thanks Jason I will get started tomorrow Barry

Last weekend I made two headboards for the wife from some designer book that were to be covered in padding and fabric. I have just completed the bedside table and used some dado rail to finish it of. SWMBO when decided that the headboard now is not going to be padded but painted. Out with the...