Search results

Hi, Thanks for the reply Mike, as I suspected, You obviously have no problems with power transferring from motor to blade. Maybe someone will come along and give me a good reason why a three horse power motor would need three belts but yet a four horse power can quite happily serve it's purpose...

I know it seems a little time consuming but when driving any screws into mdf inthe endgrain or near the edge, I alway's drill a small pilot hole first and this usually solves the problem. I'm afraid while mdf is a very versatile board material, it is very poor at accepting screw fixings of any...

Tea by a rule but I recently had a mug of coffee from a motorway services where they squirted some caramel type gloop in it and it was delightfull!!! jon.

Hello, Very interesting and detailed table saw review. Rates among one of the best i've read on here. One point of interest though, I'd like to know how the 4horse power motor works in conjunction with only one belt to the blade arbor. If when you cut at full depth there is no loss of power or...

Oh Aled i've just remembered, the newer full cabinet model doesn't have the iron feet fitted so you may well be better asking someone with that version to tell you the size. And I dont know why it's printed the last message three times either!!!! cheers, jon.

Aled, I've got the older model with legs but i'm almost certain the two will be the same dimentions and i've got the mobile base set at 30inches wide and 28inches deep, that is a really good tight fit so if you had a base at 31inches wide and 29 or 30inches deep, i'm sure that will be fine...

Aled, I've got the older model with legs but i'm almost certain the two will be the same dimentions and i've got the mobile base set at 30inches wide and 28inches deep, that is a really good tight fit so if you had a base at 31inches wide and 29 or 30inches deep, i'm sure that will be fine...

Aled, I've got the older model with legs but i'm almost certain the two will be the same dimentions and i've got the mobile base set at 30inches wide and 28inches deep, that is a really good tight fit so if you had a base at 31inches wide and 29 or 30inches deep, i'm sure that will be fine...

Hi Aled, I'll go outside and measure it now.

Hello Aled, I have the Jet supersaw and had none of the problems associated with a flat table at all. The fence was slightly bowed but I mean slightly. In fact, when ripping, the quality of paralell cut was perfect and the fence being as it is made no difference at all. When people tell you...

HI, I believe that screwfix were recently selling these for £199. I paid £320 for mine about 3 years ago. The 703 has come down in price everywhere due to the amount of alternative better saw's out there. (hope I havn't upset you too much). cheers jon.

34 and can remember my 16th like it was last week. (i'm not joking as well.) cheers jon.

Hi all, Could be that the people who schedule the programs for home and leisure have been reading some of our earlier comments and decided to give in!! (as if). cheers jon.

Hello, Have a close look at the point where the blade is welded together. It could be the case that you have a blade with a bad weld, if so, i'm afraid there's no other option than to replace it. cheers, jon.

Iroko without a doubt.

Make sure someone will help you load it or take a strong mate. Just separate the base/motor stand and transport in two pieces. cheers, jon.

Any television channel by showing a program is providing a service to the public and therefore in my opinion, if they constantly receive comments and suggestions about possible shows, they have an obligation to do whatever they can to answer those suggestions. Otherwise we only get to see things...

Hi, I've just been reading this and when I said early on in this thread "let's all bombard discovery with emails", I never dreamed it would strike a note with so many members, I'm beginning to think along Brians's lines and maybe this kind of people power could achieve great things! If everyone...

Hi, I have both, a kosha EB 3 and a dewalt sliding table with the supplied (EB3 cpoy). The Dewalt one fits the mitre gauge on my supersaw exactly the same as the proper EB3, no movement at all. The only difference between the two is that the DW has no extending stop but it could easily be...

I take it that nobody own's a standard 746 or want's a nice sliding table then!! Looks like I'm going to be comming into possession of a custom made cast iron router table very shortly then!! Jon.