Search results

So you have a LH threaded boss then a pair of 2RS sealed bearings a spigot glued into the bearings with loctite then a triple outlet connector with inlet pipe gauge and relief valve. Ian

This for GO is my connection for the outboard of a graduate

I have one of the little ones as well as a larger gast pump here’s the label and that will easily pull down to 15 inches My gast pulls to 24

I have a vacuum setup on my graduate lathe which has a bearing on the outboard end with a large dia 15mm pipe to the pump i have a bigger pump than that one you linked to when i use it ....but i have one of those too and i have used it to see if it works ( slower to come down to full vacuum)...

Now sold

Reduced To £400

Here is my little used Bosch gliding mitre saw in as new condition I’ll throw in a dust extractor as well switches on when saw starts and also for air tools Even a box for the saw Collect from sheffield £500

well i would only replace when they dont work... if theres lumps missing or loose ends flapping around replace but if the whole tyre looks like your pictures theres years left in them

Well its a lot quieter and has a collet chuck with er20 collets that take up to 1/2 13mm bits down to 1mm if needed Nothing to wear out(brushes) Smaller Cutting ability is the same i would say

I use a 2.2kw spindle in my router table water cooled Bought it as a package with the vfd

Well we don’t have that model Phil but we do have the ninja foodi 15 in 1 and wouldn’t want to be without it after a couple of months It’s really well made..heavy and sturdy and does everything well…..so far Ian

I have 4 of the air tags One on my keys One in my toolbox which is kept in the car One in the car itself And one in my camera bag They work great and whilst testing locate within metres Then you can make them make a sound to home in on them The on board battery lasts a year or so A canny...

I buy a fair amount of mild steel for small projects 2 years ago it was £1000 a tonne its now £2400

Well i have always thought that the mandril was 1/4” 0.25” But apparently some bushings are to fit on a 6mm mandrill so wont fit on a 1/4 shaft

Is there an expected size for the internal diameter of pen bushings?

The brouchure catalogue states thats it a 4 way toolpost....a dickson is only really a 2 way

It looks like a dickson type toolpost but theres many different sizes of it so surely you are going to have to wait till it arrives to be sure

Just use silver steel easily hardenable..

If you are buying a chuck then i would recommend a record sc1 or sc4 then its a simple insert adapter and when you out grow the lathe a new adapter will make your chuck fit your new lathe

Sure can send me a message