Search results

Seller replied to my query Hi, as our eBay account is for business use and not personal use we are able to input the VAT rate at 20% this will be added to the final value, a VAT receipt will be issued. I hope this helps.

It will be quite easy to do just start with a bar the max width and grind the sides down at the required angle untill it fits in the slot Just go slow I'll mil you one for 30 euros and post at cost if you let me have accuurate dimensions

I do sometimes wonder if people do read the description properly though so I may be bidding knowing I have to add 20% but others may not

Ive looked at reporting but utterly confused about which buttons to press there is no option to just say "seller expecting to add amounts/ vat"

So if they say " tough thats what we are doing" what do i do I have to go and collect I do want to win this item

As title theres an item of kit I want to buy its got 8 days to run but in the description they state that vat will be added to the total I want the item but dont feel like adding 20% to the final bid which may be £400 or so Ebay dont allow that sort of thing Do I tell the seller that ebay dont...

Paul Just wire brush to key and get any varnish and others lumps off or loose old paint Ian

Paul I have given the whole machine a wire brushing with a hard wire brush in an angle grinder then with a flap disc sand any large chips away then with a small foam roller ( 25mm dia and 100mm long )paint with hammerite ....repeat and its done

I remember going to a woodturning international workshop in about 1992 and david elseworth was doing a workshop after he had finished making one of his small hollowed forms he was taking questions from the attendees and had about 12 on the table next to him including the one he had just...

Mike all done and in the post many thanks ian

yes

Theres lots of ways to do it but I would.... if you are starting with a square blank then cut to 2cm over finished length of box and mount between centres and turn to your cylinder Then using your chuck mount blank and bore down to your diameter for the glass then part off lid then remove inside...

Mike Its complicated as chj says I do it by selecting a piece of steel for the adapter in your case 1 1/8" dia drill and tap for your male thread 10mm x 1.5mm pitch ( not tpi as you stated) and if theres a register machining that ....concenricitty isnt too important at this stage then mount...

I think on ebay you would be lucky to realise much more than £150 for that Ian

What do you call big bucks I'll make you one for £25

Paul a shortbed has the same swing on the inboard and the outboard ends I have turned 20 inches x 8-9 inches thick theres no real need to use the outboard end on a shortbed unless you are left handed perhaps Now a long bed or standard machine only swings 12 inches inboard and 20 inches...

Fantastic lathes within its size limitations Nothing to go wrong all parts easily available if any missing/lost Theres only bearings and a drive belt to ever replace I suppose motors could wear out If you buy a 3 phase one and fit a vfd you have a lathe for life No connection but the short bed...

The max sizes are roughly the same on each side 20 inches swing All chucks come with 1.5inch 6tpi threads available....or rather all chucks that you would want to buy Yes you could modify to get a larger swing the beds unbolt and you could make a dropper plate to set it lower then extend the...

these are handy and look as they do the same job as the clamptite at a fraction of the price http://www.ebay.co.uk/itm/7-Lockwire-Sa ... 4d318af643

I dont know this machine but does it have a switched guard on say the belt cover if that isnt making then that could cause your problem Ian