Search results

Hi, its from Newye & Eyre ( now Rexel ) their own brand stuff .. shatterproof & the 'plastic' Sockets are MK Logic range also virtually indestructible. Cheap as chips to be fair and makes a superb neat job.

Lol I would but its a soft top !! still waterproof but I wont get away with that one i'm afraid !

Don't have ! its not working yet need to sort the inverter...................

Hi All, Bit of an update for anyone who takes an interest..... R/H side now almost complete, chose to just go with the one outlet on the Extraction for now till I see how much of a faff it is to keep swapping hoses ! Just need to put some doors on the Extraction Cupboard and our lass needs to...

I bought a metabo 'Thicknesser' a while ago and wished I had spent more and bought a planer thicknesser .. just seen that FFX have a deal on ! https://www.ffx.co.uk/tools/product/Met ... 7pEALw_wcB

Very nice ...I'll have 6 please

I have a 3 fingered friend that cut the other 2 off while he was making a guard for it !

I have a triton router maingy used under table and struggle with only having 1 arm re adjustment read this and realised I might be able to remove the springs ( found it only has the one ) removed it and OMG !! so much easier now

TBH I got a little bored watching .. quite sad really... but whatever floats your boat ! he obviously doesn't have a wife

The Camvac twin has plenty of suck ! and is always upgradable with a cyclone if you are going to end up creating more chips / dust than you 1st think, I have gone down this route as I wanted a fixed position system with the Dust extraction hidden and run 110mm pipe reduced down to 100mm with...

Hi Biblu, That was my initial thought but really wanted it up out of the way so I went with that and will 'suck it and see' I could have done with some kind of 'Suckometer' to try both options 1st before I fixed it all :shock:

Hi, didnt get what you meant so googled it ! yikes i see what you mean, nightmare ! thanks for the input

So that's even better ! It should almost be quiet in the shop then :-)

Hi Sunnybob, many thanks for your input ( thats why I posted as I am only a newbie )! I am drilling a 115mm hole at the top today to push the top 2 x venting hoses from the Cam Vac into to vent outside in the Summer so there is no heat build up and then redirecting them in the winter out of...

Went with the latter option.... high level with the thought that if it doesn't work I can always move it lower down which would be far easier later on than putting it higher up ! sealed the 2 x 110mm-100mm adapters for now with some masking tape to try it seems OK but i'm wondering if i'm...

are these items sfs ?

do you still have this ? also do you have any other Graduate bits ? Cheers Roberto

Daft Question cant you just but the roundover bits you need ?

Hi all, bit of an update :arrow: been a tad busy with parents .. one that's broke his leg .. another with CV19 and inlaw that is just barking mad ! Moved over to the otherside of the Workshop ( I really mean our lass's garage ) and insulated and lined it out with 12mm ply, took the advice...

There is no way that I will be allowed to have any dust in there ! one half has now all been insulated and boarded out and painted now its over to the other side to sort the same !