Search results

The NV750 is reasonably powerful (which is an obvious initial benefit) and try to minimise the amount of flexible piping in the system. I also ensure that any pipe runs have 45 degree rather than 90 degree angles and I keep the pipe diameters at 63mm whenever possible. I am stuck with 90 degree...

I use an NV750 (but a cheaper Henry will do a decent enough job too). Numatic NV750 Workshop Vacuum Extractor - 230V | Axminster Tools It isn't M class but has a decent enough suction for my needs, which are not commercial. I have a remote control on/off DEWENWILS Remote Controlled Plugs...

indeed, this is very much the case. In this design (from The Woodgrafter) he started off with the design that I followed but also offered a table insert with a router lift as an alternative. The shelves underneath actually lift out so can accommodate the depth of a router and lifter if so...

I probably should be a bit clearer : If the array of holes can be cut within the length of two parf sticks then there is no problem starting in one corner and working outwards. In fact, that should be the most precise method. If, however, the array needs to be bigger than a parf stick in one...

I did reply in your other thread - but have copied it to here as well, just in case you missed it over there. If you are very new to all of this stuff, the video that I have mentioned (and many others that Andy has done) make very good watching. I learned loads from them. The bench, by the way...

I have the square as well as the 1400mm fence and it has been spot on when installed on a Parf II array of holes. If you haven't been here, you might like to watch this video and a few of the other ones that Andy has done: Benchdogs Mk2 Fence system - Review - YouTube There isn't any...

I know you've made them before but were unhappy with the result. I built a couple of them for my bench using the Parf II system and it was quick, dead easy and, going the five part cut as a test, turned out very well. I also have a load of Benchdogs kit and it works nicely. The Parf system is...

I had my name down for a black watch but delays and more delays, if I remember correctly, caused me to cancel it. I bought an LED watch on the high street in the end. I never went down the ZX route, instead, BBC Micro. It paved my way into electronics and my degree project used one as the...

It may be wishful thinking on my part, but I would like to see a step change in attitude about purchasing: for too long we have chased the cheapest prices as suppliers, as well as consumers and even at a Governmental level. Brexit has made certain markets more expensive as imports for us and the...

I don't blame any business for charging as much as the market will stand. If the business offers something that the market wants and the customers are willing to pay a premium for it, I believe that it is good business practice and makes total sense. I have bought plenty from Axminster over the...

I have a cordless DeWalt sander and am happy with it. I have a number of DeWalt cordless drills and about half a dozen batteries so power and recharge isn’t an issue. Yes, it’s mainly used in the workshop but having no cord means that it can be used away from a power source on occasions.

Welcome Simon. I retired three years ago after most of my life being in the technology industry. A few years at the end were left of field owning a domestic repair company. So much learned in those years! Retirement really works for us and I’ve no wish to go back to work. Time does fly...

Indeed Ollie, and I've often said to people, you only realise the financial value of a house if you plan to sell it and live in a cave or if you are forced into a care home. We are in the process of passively looking as we may move next year - various windfalls allowing us to move somewhere...

I feel that the belief that money is wasted on rent isn't especially valid. While I don't rent myself, but have done on occasions, a mortgage isn't the holy grail that many people think it is. If you rent, you pay somebody each month for the flexibility to live in a place, generally free of...

If you are currently renting, get into the market, certainly. Long term, its definitely a good investment. If you already own something and are concerned about staying in the vicinity, definitely start looking seriously. Rightmove is an excellent resource. Decide upon a new area and target...

Jet JWBS-120 - owned for more years than I can remember and never de-tensioned.

I’ve had bikes with rim, mechanical disc and hydraulic disc in a variety of on and off road guises. I wouldn’t contemplate off road with anything but very beefy hydraulic dics - perhaps because I ride rough single track and value my life and limbs. I have a road bike with mechanical discs and...

From a measuring perspective I find that these have been a game changer : INCRA TOOLS :: Measuring, Marking & Layout :: Precision T-Rules I also agree that a digital vernier caliper is well worth the money. Being able to get square edges and square corners is a big one too. There are many...

I think that much depends upon the shape of the lawn and anything within the boundary. A square shape is quick and easy, shapes are less so. I had a Hayter Harrier 41 which lasted about 20 years and has gradually become unreliable. I bought a replacement Harrier 48 with every feature except...

I also have a Stihl. Mine is electric but I think that the petrol version is probably better balanced and suitable for your needs. One big consideration is balance/weight: all very well having a monster of a cutter but if it's heavy to move around most users will quickly tire. My Stihl has a...