Search results

High need help with the above saw does anybody have one plz its missing a few parts and on the parts diagram it doesn't show u were they go how they fit ect its mainly the idler pully and belt tensioner Which are missing could I fit something universal to get it to work

yea that's right ta300ps sorry

I have got this saw and there are parts missing wich I am going to try and get but don't no qwite were they go as on parts list pdf you are looking at them from the wrong side as anybody got this saw or the ta1250 that would take me some pictures of were they go its all to do with the scribe...

can anyone help me I have same saw I thought it was ta1250 orderd some parts from altspares they don't fit soo had a good look round and realized its a ta300ps n I need help with thiss saw as the idler pully and tensioner assembly are totally missing im in need of pictures so I no were they went...

been offerd a lazzari cs4i panel saw with scribe blade need to convert to single phase or swap motor to single phase wich will be cheapist option motor is I think 4hp 3.037kw 415v 60htz at least that's wot I think it says its hard to see

hi I have been offerd a pk250 cabinate saw with scribe blade came out of a school for £350 its just saw only no extensions or sliding tables is it a good deal or a bum deal

i love the saw i have its powerfull enough got all the stuff i need sliding table 4inch cut ect but i want to put in a zci and seems a little tricky also wood prefer it buit into a cabinate and the steel top is not perfectly flat o and no mitre slots but do i really need them as ive got sliding...

like this one you mean http://www.ebay.co.uk/itm/17th-EDITION- ... 43b6546885

Hi all i'm going out of my mind googling table saws just don't no wot to buy at the moment i have the scheppache tku 4000 with deluxe sliding carriage ect but i want to upgrade i no its been asked before but wot would you buy and why i kind of don't like the record because of the sliding...

Hi all i am just adapting my out building to make a little workshop its 17ft by 15ft half brick half wood it is roughly 1mtr from house and 3mtr from mains consumer unit i am wanting to install electrics and do all work apart from conextions leave that to a sparky i am wanting strip light 2/3...

well i took it to a motor shop and they said needed new bearings and a rewind asked how much as i can get a replacment for £149 they said be less than that so i had it repaired then they tell me its £145 + vat

ive just rememberd dont no if it helps diagnose but on day it died i kept getting little electric shocks from steal table wen i checked earth was loose on extension but woudnt work after that tried in mains ect to no avail thiss may be a stupid question but motor is sat on my table in house...

i have a a multimeter its a sinometer ms8230b and in all honesty i havent a clue how to use it setting ect any one help me out

just a thought it cant be anything to do with it being removed from the saw could it like i mean not earthed to the saw

hi i changed cap still same changed wire and glass fuse still same i have a multimeter

no i have removed it from saw and taken blade off and the hum was from switch no sighns of live at all from motor it has a fuse inside wich looks intack dont no were to start

hi all newbie here in need of help i was using my tku 4000 the other day i switched off for a min then switched back on and nothing no sighns of life at all so i spoke to allan at nma they said probably bad cap so sent me a new one free of charge came nxt day still same so they sent me a new nvr...