Search results

look for a use Hegner on ebay and the likes also on the for sale section on here, there was an axminster ex 21 on eBay on bids will be close to ending just been on ebay there aretwo old style hegners and an ex16 thelast one only has 30 left ans its a xracking price take care John

do that pattern in 12 months time and it will show you how far you have come, go to Steve goods site for your patterns they are all free, botas helder, jim blume are two other people I would recommend you visit they have 100s of patterns and all are free, scroll saw village is another site to...

just finished this today, and posted as I said I would john

thank you, I am doing another bigger one for someone else when it is finished I will post it, again a Steve good pattern John

thank you 5 mm plywood and 12 mm base

hi made this for my wife yesterday a a Steve good pattern, the candles need fastening down in the right place take care john

yes thanks , made quite a heck of a lot over the last three years, from 7 inch high to 3/4 inch large ones on the band saw the small ones on the scroll saw, the ones above are just a change, and easy to do not a lot of brain power required lol. take care John

found these on Steve goods site, cut a set for my wife and now I have orders for 4 more sets. take care John

I normally use flying Dutchman blades from Mikes workshop in the states,about £35 including postage for 144 blades and they do allow you to order a selection of blades for the 144 blade price. Recently I have been doing a lot of scrolling on 30 mm pine boards and could not wait the postage...

no I havent already tried this but its a good thought, i do have some 1 mm drill bits I will try this on a piece of scrap and see where it gets me, probably searching the floor among the debris to find the pin I dropped, magnets to the fore

sorry for the delay in answering you question , I dont put finish on anything i do, its the coulour of the wood after the varnish etc has been removed,

hi hi Don I am afraid i had to cheat with the hinges, I superglued them in place , as I have bad arthritis in both hands, I will sell this when I get the roof an steps made, and give the pins to the person who buys it, and they can put them in, its been a very steep learning curve but I have...

here is another update the roof should be ready to go on tomorrow, then some steps to make and its done, someone else can finish it. take care John

got this far last night, tried to put the hinges on but the pins are so small I will have to glue the hinges in place then put the pins after they are stuck down, then its the roofs turn, I am using bendy plywood , and last night bent it into rough shape and put painters tape round to hold in...

put the wheel hangers and wheels on and glued the hut together except for the roof, will hopefully get round to that tomorrow, once I get the roof sorted i will post some more pictures, I have one major draw back, I went to put the hinges on, and my arthritic hands cannot hold the pins, even...

have a watch of the alex snodgrass band saw set up on you tube, it worked for me when I had a record power 300s, take care John

ok Andy how are you all keeping?? John

todays update, the bolts have finally turned up yesterday, made the wheel hangers for the axles, and wheels - onto the 3 rd set keep not liking how they turn out, - might yet have to make another set, while i was waiting I did another tree elf from a Jim Blume pattern and other stuff - got...

hi I started to cut another one last night take care and stay safe john

Hi Don ok will do, the bolts have not come yet so will have to start something else till they do, one thig I will not do is paint it as I am rubbish at it, I will probably sell t for someone else to finish, I wont be making furniture either, if there is enough interest from the people who want...