Search results

Thanks very much for answers and ideas, it's very much along the lines of that wooden pulley wheel but 6-8inch diameter with a wider groove. They use strips of cloth backed sandpaper (garnet?) Glued around groove. This allows the corners to be evenly and quickly rounded over resulting in a nice...

Thanks for replies marcros and rafezetter, unfortunately don't have pictures. If you can imagine a 1.5inch wide mdf honing wheel with a half round groove cut into it , then mounted like a grinding wheel onto bench grinder shaft. I have a spare grinder shaft on a bench grinder I have my mdf...

Hello guy's, not sure if this is the correct place to post this, but thought I'd ask anyway. I make wood fishing lures, and for certain models I use a chisel and file for rounding edges, some australian lure builders use a homemade 6-8 inch diameter wooden wheel with a concave groove cut into...

Thanks replies, I will look at each option,or any other suggestions, ......peteglider

Thanks for replies ,is appreciated. Will look at each option.I was led to believe rip saw type blade had a combination type tooth pattern that would produce flat kerf. Myfordman ,hope you don't mind me asking as I remember you asked this originally -are all teeth ground flat ?,cost? JSW ,are...

Hello guy's, wonder if anyone can help, I need a cheap blade which will produce a flat backed slot. Can anyone tell me for sure if screwfix titan and/or freud pro ripping type blades will do this ? Any help appreciated .....pete

P.s. in case anyone has foxf28-191 and upper guide at angle, I can tell you quick fix if needed.

Rodders, prob as much use as g.b.manual, for example instuctions on putting together includes the following-attach all four legs to the bandsaw blade!, regarding the bearings I had to modify to get lined up, however fox also sent me new upper guide when I contacted them, the problem was a fixing...

Many thanks, I have small bandsaw fox191, no probs rust etc. Just wanted to check, been running well for 2 months, just thought I would check, cheers.

Loooking for advice on blade maintenance, is any maintenance required on bandsaw blade , I.e. wax, lubricant or such like.my saw and blades working fine, just wondered if I should be doing anything to blade, cheers

Only for cutting rough shape max 25mm do you think clarke cbs 250 would be up to job with proper setup and tuff blade?at moment using bench mounted jigsaw and noise horrendous,I refine shape on sander. At moment I make for hobby but also well some, advice appreciated cheers

Can anyone recommend bandsaw this price range, using to cut fishing lure blanks from cedar, mahogany, etc upto 25mm.most this price range look same, been looking at clarke cbs300, I know I will need to replace with good blade but what is best saw in this price range? Help appreciated. Cheers.