Search results

They say 6 months after opening, or sooner if you start to be able to smell stuff through them.

Have you tried JMJ wood machinery? I have had a couple of machines (including SCM spindle) off them recently and they came from stock.

Yes I got all the galvanised ducting etc for my workshop from them and continue to use them for extractor bags etc

I never got decent extraction with my Sedgwick MB. I had a plywood chip collector I made which performed pretty much as Doug is describing, and then eventually bought a metal one from a Sedgwick and it really wasn’t any better. That was with a good size extractor and a 125mm hose. There was...

Has anyone tried Hidrofuga MRMDF? I’m currently talking to a potential new panels supplier who is telling me that it is good stuff. There are a couple of videos onYouTube which suggest that it gives a superior spray finish to a Medite MRMDF with less work. But it’s not cheap. It’s almost a...

Has any any experience of using this for building carcasses? I can get it at a good price (only a few pounds more expensive than unfinished), so it is a tempting prospect. My concerns are 1) scratching it when machining and 2) finishing the edges without covering it in overspray. I asked on a...

Well that’s interesting to see Doug. It certainly doesn’t look too bad and the noise levels sound great!

Just something else to consider... I recently bought a planer and was considering a spiral head. I was strongly advised by the machinery dealer (JMJ woodworking) to stay away from a spiral head if there was going to be any softwood used on the machine, as all the little cutters and screws will...

..or Tersa

I have a Fuji Q5 turbine and the T70 gun with a selection of air caps and also the remote pressure pot which I have been meaning to sell. All in good nick. PM me if interested. Mike

We use Morrell's waterborne lacquer for spraying MR MDF. Hopefully you have used the moisture resistant boards as it makes quite a difference on the edges and a bit of difference on the faces. They do a white or grey primer and then tinted top coat to whatever colour your like. Sprays very...

Leave long tails in each socket back box, strip the external insulation right back to where the cable enters the back box and then twist the over-length inner cables into a bit of a loop when you screw the socket front to the back box. So essentially all the slack is within the back boxes not...

Very nice Dr B. I always like having a look at your work when you post it.

I have a spare Whitehall head for a multico tenoner. Not sure if it is a top or a bottom head - it came as part of a job lot. PM me if you are interested. I prob won't be in the workshop until Monday.

Nice job.

I used to run one of those via rotary phase converter and it was fine.

I've just had a look at their website here is a picture of the truck! www.northernwilds.co.uk/book-wild-food-wagon/

Yes Lons there is! Have you tried their pizza? They have a towable wood fired pizza oven too and make some cracking pizzas. I first met Linus who owns the truck a few years ago when he helped us move house with it (in Hexham) as he is a friend of a friend. They featured on Countryfile just...

....You might also be interested in the large stock of various locally sawn native hardwoods that Geoff sells!

Try Langley Furniture Works on 01434 688977. Ask for Geoff Jackson. They did a very impressive curved handrail on one of the bridges in Newcastle a few years back. They are pretty local to you, between Allendale and Hexham. http://langleyfurnitureworks.co.uk Hope this helps Mike PS please let...