Search results

Bearing in mind the possible differences in the switches if you take the side off the NVR switch you should be able to see the PCB and the fuse without further dismantling, check the fuse and if blown it must be replaced with like for like, You will also see that there is a 5 core cable going...

The NVR switch is quite a complicated affair on this machine as it includes a printed circuit board with its own fuse and I am afraid it is not an easy matter to remove it and trying on another machine, Like Roy I don't advocate you taking the switch apart unless you are qualified, better to get...

:occasion5: Happy New Year to you all Nigel

Hi I have the HC260M and the instructions say if overloaded wait 10mins for the motor to cool down then press the start button , as far as I can see there is not a separate reset button only a thermal cutout which resets when cool, have you checked the supply fuse as an overload can sometimes...

Axminster are still doing the £10 off on orders over £100 when you get to the checkout just click the box saying £10 coupon for over £100 I have just done it ordering some things I received money for at Christmas, Cheers Nigel

:ho2 A very merry Christmas and a Happy New Year to you and your families Cheers Nigel :occasion5:

I have found the same attitude Chipp and it gets even worse if you wish to exchange something, Now I only go to their shows and don't bother with the shop, Cheers Nigel

This company is just up the road from me where I buy all my fastenings , unfortunately the webb site is a separate part of the company and as such the planes can only be ordered on line, I have spoken by phone to them and although they are aware of a recent price rise from Veritas they are...

Just because you are not paranoid doesn't mean they are not looking for you :lol: Nigel

Somerset is a lovely Part of the country we tend to spend a lot of our holidays further south near Exmoor, Nigel

Welcome Phil, What part of Somerset are you in, Cheers, Nigel

Hi I am not a Turner as yet but I bought the Rutlands chuck last time it was on offer, well Graham did grease the slope, One observation is that the machine screws holding the jaws are very short to the extent that only 3 threads hold in the chuck I managed to strip 2 of the screws so I...

Sorry to hear of your loss Andy,one of the sad facts of life our dogs don't live as long as we do, only time will heal the loss, My avatar until recently was of our Bearded Collie who past away at 15 years old and I never felt like changing it until the demise of my photo host, now my avatar is...

Simon Thanks for taking the time to help the IT illiterate like me it works a treat I have even managed to replace my avatar with your help, Cheers Nigel

Thanks for that Alf I will give them a prod Nigel

Before I fire off another missed issue note to Popular Woodworking has anybody received the October 2007 issue yet or am I being impatient Cheers Nigel

Paul I have used those self adhesive coloured dots you can get from stationers 1 pack has many colours some are quite small and at a pinch you could even add written info with a pen, cheers Nigel

There was a discussion about which way to cross cut at Steves bash where Waka brought along his new Festool saw, when demonstrated most people were of the opinion that the saw was used like a radial arm saw ie the cut was made towards the fence I asked the same question as you because my...

Trend have shown me their great customer service I purchased a multi bearing rebate cutter from my local stockist to use in my router table but tuits being what they are I only just finished the table when I took the cutter out of its package I found that the carbide tip was chipped, so...

Thanks Dave & Naomi for a great bash and to all who helped make it a good day, A great demonstration by Colin on veneering plus the scraper sharpening which will help me on my first try, Andy said he knew a man called Mr MDF must be from up north, Cheers Nigel