Search results

alan, Does the morrells stuff have a noticable effect over just usung 2k primer?

Just ordered a basic pdc with a charger and a 5.2ah battery from ffx, worked out about £300 and i have a free battery offer toO, so will have the two batteries hooefully! Will let you know how I get on :. Massively impressed with the c12 and t12 drills i currently have

I used a track top and bottom, it was a pvc one designed for sliding sash seals... I would in the future use a single track at the top for alignment and the lower track simply to keep the bottom in place, then make it so the upper track or the piece of timber its attached to is adjustable...

I would be incredibly surprised if you made a jig that would be a one hit perfect fit in any lining.... The smallest of shavings can make a difference to the gap appearance, something that takes time to get right. Get a long level or straight edge, piece of 9mm mdf about 6" wide? And cut it a...

Lovely building, there is alot of time and planning gone into that!

are the photos on their side? on my Ipad ther fine, but on my compter there at 90 degrees... thanks for the kind comments.

This was a bit of an unusual one, a customer wanted to buy a cabinet that they had seen on the internet consisting of a single carcass, and a sliding metallic door front that located in some grooves top and bottom, This then turned into multiple comparments for all their glass ware and...

Fantastic, i think i remember you asking about the doors! I would go veneered accoya boarding ontop of tricoya than grooved accoya. The grooved tricoya looks very plastic like, especially when sprayed as there is no grain, whereas sanded accoya brings the grain out beautifully, as the wood...

Felder fb610 bandsaw: http://youtu.be/tXhfT8p2TmU

The blankimg plates are on order, but otherwise its complete. Its nice to have a start button for the extraction inside the building!!! ;) The panels are cold store pannels, 100mm thick, so hopefully help to keep the room nice and dry. And warm if i ever sort heating out... The floor has 2"...

hi orchard i have had a good look at the locking mechanism for the tilt and there is definitely no way to lock it up other than that to tighten the bolts on the mechanism and that is quite awkward. i can only see it being an issue when you're using big timber as i bevelled some pieces today and...

Hi guys, quick video I made today for you, will get one of startup/ cutting and stopping up eventuallu Felder FB610: http://youtu.be/6KI_2trj1fc

Couple of pics of the wiring/conduit incase it helps anyone.

http://www.cutting-solutions.co.uk Speak to doug, he should sort you out.

Hi robin, Thanks for the info, we actually finished the wiring yesterday, or very nearly atleast, and have done pretty much exactly as youve suggested, similar to how our old workshop was done, 4" galv trunking around the edges, and 25mm pvc pipe to sockets lights and machinery. I will get...

Hi guys, I got the fb610 and the rest of my new workshop wired in today, so i will get a video up of startup and resawing at some point. Not had a chance to push anything through it yet, it did require a neutral to run and its got a dc brake, which I didnt know...

perhaps speak to a specialist plastics company like igus??

The fittings that come with are standard fittings, and are high flow..... Pcl are bigger fittings with a smaller flow. Its just they are more common.

ive had a SIP 12" bandsaw for about 7 years, bought new for about £200, been an awesome little machine, very accurate. just replaced all the bearings on it for about £30 as a few of them were ont he way out. Tbh iits not had much Love, been sat int he same outbuilding as the dust extractor...

Not up and running yet but getting very close :) cannot wait!!!