Search results

woodsworth. It would need a full drawing if it has integral shaft as the bearings on the machine need to be located precisely to match the location on the head. If the head comes off the shaft its very easy as you would need a plain bore with perhaps location points to attach to the shaft. where...

I can supply 1/2" Mortice chisel & bit (Type 150) for the Multico machine @ £40.00 +carriage + VAT. They are the similar to the ones sold by Draper. I will not sell the Clico ones. other sizes available...please ask

The statements on the Byrd site about finish are true but..... you have to make certain the seatings are very clean when replacing the knives otherwise they may leave shadow lines on the timber which will require sanding. Their knives seem expensive too. They usually use 14x14x2 or 15x15x2.5...

Not sure this is going to work. do you mean like the (scroll down the pages) ART 104 on here: http://www.cputensili.it/pdf/CatalogoCap3.pdf

when you say "helical" do you mean one with lots of either brazed tips or disposable knives spiralling around the head over its full length?

Yes they are made by another manufacturer. Not Titanium plated but will last almost as long but at nearly half price are good value.

One of my Reps in a previous employment got big C in his nose. He had been complaining to the Doc for ages that he was always sniffly. when they finally investigated and diagnosed..... he lost half his nose and one eye. Cause? Hardwoods/redwoods.

The problem with gently honing is you MAY be causing more problems for the saw doc to cure at a later stage (gringing off more carbide to get the cutter back to peak condition) IMHO Ignore honing you should be able to get a feel for the performance of the cutter when used on other materials or...

Jason I agree with using the disposable knife system. You get a harder grade of carbide, which cant be brazed onto the base metal and constant diameter when replacing the knives (sharpening reduces the diameter on TCT cutter) Is 50 mm long enough for some works tops? Though at 5.00 per edge they...

The BEST Router cutters made in UK are available from Titman. I have been selling them for over 25 years without problems. More exepnsive but you pays your money and gets your choice. BTW....make sure to ask for a little :wink: discount on the list price.

You guys never cease to amaze me. A router is a precision tool and you want to sharpen it with a diamond card. How are you going to ensure that both wings (assuming its a two wing cutter) have the same cut circle? Nearest saw doc to you is probably John Porter in Meare Nr Glastonbury. Do...

Not sure if they will have all the hand tools but Saw & Tooling Services 50A Slighthill Crescent may be able to help. You might tell them I recommended them....they are a very good customer .....

Hi Mick. In my previous employment I dealt with pretty much every saw doctor in the country, so can inform anyone about their local saw doctor. Southern Counties are one of the best. If you use them I would be grateful if you told them I recommended them. No connection but I would like them to...

Any decent saw doctor should be able to get the blade back as good as new (if even better....the grinding wheels they use are often newer than the ones used on production lines) I am not sure who Oxon F are sending their blades to in Manchester (there's loads of sawdocs around there) but there...

whats it made of GOLD? 70 quid for any CMT blade is excessive. what size and what is the kerf? as for sharpen and re-tipping @ £30.00......Not cheap but better than 70 quid for new CMT I can supply new (im guessing the size you use): 250x30 3.2/2.2 Z=80 triple chip for fine finish @ £38.00 +...

Jeff the majority of the pre-profiled knives for the Universal cutterheads are made from an "SP" quality knife and wont last long in oak. there are some companies that sell HSS, but that can vary as well. the most commonly used in woodworking is 18%. that will last better on oak. I cant find...

the silver ones are High Chrome. Not suited to Iroco at all. 260 mm ones would have cost 3.75 each. I suspect thats what you were sold. and charged an extremely high price if you were charged 50.00 for a set. not sure how long the metabo ones are but you could do a rough calculation from the...

Did you use the same system as indicated above by Owen? if so what colour were the knives? a) shiny silver b) dull grey

Corset didnt explain why the minimum number. I dont buy a lot from that particular supplier so import costs and bank charges make the product more expensive. they arent on the web site because its impossible to show every product available on a small footprint. If your planer has plain knives...

Puzzled why you say that... there isnt a 304 mm size