Search results

12mm far eastern ply from your local builder's merchant or Diy shed should be fine for that, just make sure you sand the edges well.

Never would have thought of llooking there, thanks for the pointer.

Excellent thanks for that advice I can now get the right bits for the job.

Are you there Myfordman? I need some advice wiring up a large motor, as per pictures it's 3 phase and has been star connected in the past. My main concern is the best way of switching it, do you think a DOL 415v starter fitted with a 13.0>18.0 Amp overload be OK? If it helps it's a rotary...

Just a guess, I think it is a saw set for a bandsaw.

A bit of a long shot, is it standing on a level surface? I had a small genny and had similar starting and running problems and later found out that there was a oil and switch inside that would stop the engine if it wasn't standing level.

Even if you are lucky enough for the panels to stay flat you will still need to accommodate at least 1/4" may be 1/2" of variation due to seasonal movement at the centre join between the two doors.

I really don't think I'll be eating any more of those things any time soon, something I've eaten this weekend definitely doesn't agree with my insides and those mushrooms are the prime suspects at the moment.

Stored? I've eeaten them. They were growing in an old grp water tank filled with just shavings and sawdust out side my workshop.

So far so good, quite tasty anyway.

I thought some here may be interested, a few years ago I forget exactly how long I planted/inoculated some sawdust and shavings for the workshop with wine-cap mushroom spores that I tracked down on the net, any way it was so long ago I had just about given up on it as a bad idea but today I have...

Wot ^^^ he sed he sed.

That's alright then (homer)

They have to be 2.8mm dia and on 10mm centers. but other wise yes peg board.

I made it 1.3 seconds per hole

Well with out the set up time and the three months to get the machine working the total drilling time is........................4 hours 51 minutes and 25 seconds Without the clients permission I can't show you the whole thing but I can't see any harm in a bit of it. I think the idea is to put...

Thanks for all the suggestions I've checked them all out but no luck so far, looks like I'll have to make some in wood/MDF .

About half done now, and some one looks like being pretty close, not saying who though.

Well as it happens it does have eyes, one or two iI'm not sure which at the moment.

And then some poor sod has got to put a screw in each hole, not me luckily!