Search results

Qui in rural France is pronounced "Ke" Manuel to the front please. 🥴

DPM, Visqueen or duct tape will hold moisture (condensation) against the steel and eventually cause rusting and failure, do not use any kind of loose wrap.

FWIW I am a Retired Structural Engineer, post 10 is correct as you say, the steel beam should be red oxide painted to prevent bleed through, if bought from a reputable steel fabricator this would be done as a matter of course.

Can I just say I am irritated by all the post on irritation. 🤣

A thank you would have been nice on my post.

And leader/teacher in German is............

The OP did say shed, not Workshop.

I remember the Rolling Stones first gig at Ronny Scot's and seeing the Beatles at Lewisham Odeon, now that's old. They have left the C off the word rap.

I love wod working. LOL

Does the inside of the shed need to be level, as long as the edges are then just put the shed on top with a DPC under, perhaps even some tiles on sand and cement, it's only a shed not a habitable building.

This may help: A guide to dust extraction by member siggy_7

It's Russian for ammunition.

I will go with an embossing wheel, the teeth are too blunt to be a stitch marker.

For a planer you need chip extraction not dust collection, a vacuum cleaner will not work as well.

A broken belt will not stop the motor from turning/running if the motor does not turn then the internals have burnt, budget for a new improved smoke container.

Trying to take a pic of our Gazenia, but for some reason my camera will not focus down enough, its too complicated. LOL Best I can do.

What Mk is that model, as I remember the back end being not as deep and the fin being much smaller, not criticising just interested, have you thought of modelling a Wilga?

Cut sheet goods with a track saw. Rebates for drawers with a router mounted on the track from your track saw. Can't remember the last time I used by table saw, seems redundant since I bought the Track Saw and bits to fit the router on it.

I think you hit the nail on the head there "flat tyres" if you have domed tyres the teeth of the blade should be just off the dome which would put them inside the outside edge of the wheel, as far as I understand the operations of Bandsaws, but no idea what this Kity is fitted with.

We now have a third "Don't talk about" used to only be politics and religion we must now include ULEZ or is it child labour.