Search results

If the problem happens again, as it sometimes does, my suggestion is: Remove the arbour from the machine spindle. (You should have received a tapered metal drift with the machine. Fully extend the drill feed and you should notice two oblong slots in the spindle wall. Rotate the shaft until you...

Hi folks. I am in Australia, so the following may not be applicicable to GB. If you can locate an Industrial "saw doctor" close by, in addition to offering sharpening services etc, they also normally supply and sharpen/grind/assemble make blades to your requirements. I got onto a local one a...

Air tools with motors etc require a small proportion of tool oil to be added to the air to lube the motors. Most tools will come with a dripper bottle and the advice to place a couple of drops of oil into the air inlet before connecting the tool. If a tool is lubed this way, most of the oil...

Hi, Australian newbie here. Motor data plates show the design input (rated) power in Watts, KW, Horsepower (746W) or ps (metrified horsepower 750W). This is so the end user or their appointed installer can determine the power needs of the unit, and ensure that adequate power is available from...