Search results

Norm uses them. http://www.normstools.com/nailers.htm

I use these blades they are ok. http://www.summitsawblades.co.uk/saw_blades.htm

Here is some more info for you http://www.popularwoodworking.com/projectplans_display/?planid=11076 http://www.popularwoodworking.com/upload/contents/334/fea39.pdf On my saw the bent metal, wood supports will have to be removed but they will not be required.

Does this helphttp://www.majorpanic.com/Slide_Show.htm

Could you cut off the bad part of the door and replace with hard wood profiled to prevent further steam damage and consider doing the other doors to match.

I say stick to your dec 1 plan but consider the SIP if you do not need the sliding table or can not find space for it. Your list is good and you could buy some things later and/or check out b&q for triton offer, if you do give some one a large order push for spare/additional blades etc to be...

Vegetable oil will go rancid try chestnut food safe oil page 474 in axminster cat. (200772)

They both look fine and there are others you could consider like make a custom one from hard wood or use a block of wood and a clamp.My eb-3 comes with one but no ruler scale but it works fine for repeat cuts.

I think you should try harder to get what is a current saw repaired they are quite a simple machine so it can not be that difficult . Always start with a new blade and go through the set up so you are minimising the load then determine what causes the slipping and get it fixed. I assume you are...

I have some 3 ply on mine with a cut part way across fence parked on extreme rhs to form a quick remove cover its rust free so far.

That hasp has been installed incorrectly all screw heads should be covered when its locked but its easy to fix.

As you will know statins can cause muscular problems so he is trying a rest from them but it can take 3 months for the chemistry to return to normal so give it some time. How do i know this, well they don't agree with me and my new blood test is in 3 months to find out what the next move is.

I purchased a infrared heater from focus i think some time ago, it heats you not the air and as you are standing at the lathe it could be the temp. answer. Polystyrene in 8x4 sheets cut with dowel trimming jap saw will help for the doors and roof also the elimination of drafts temp. closing of...

http://www.summitsawblades.co.uk/contact.htm They will give you all the info for the reduceing bush/ring go for axminster (better quality)

Summit blades work ok on my SIP http://search.ebay.co.uk/search/search.dll?from=R40&_trksid=m37&satitle=summit+saws CMT series 285 axminster are the best i have used to date.

There are companys that will spray foam on the under side of your roof which would be the best solution i hope you can find one that takes on small jobs.Expect a dramatic improvement.

The FOX double disc sander http://www.amazon.co.uk/FOX-F31-122-Double-Disc-Sander/dp/B000QDIU0I I bid for one on ebay £50 start price £20 delivery won it and its just been delivered its a great tool for £70 just makes me wonder how much markup we are paying on all our power tools.

I agree with the above ,the last 3 on the list could be better . No time to make a router table then consider a 0.25 router they are much lighter and easy to use hand held and worth having. My final suggestion for the last 3 replacement is a festool Domino read up what it can do and you may...

If you are saying that the long part and short part of the T fence are not firmly connected there are screws inside the junction that may be loose you need to separate the parts to find them .

Adjust the fence lock so that its just gripping hard enough and not to hard also check the plastic wheel it rolls on for muck and any casting flashes lub with wd40, adjust height of rear rail to keep fence just clear of table this should then give you min friction. My way to move it, is slide to...