Search results

Have a look at toolstation f clamps and aluminium sash clamps also axminster

Yes the irwin but not the uprated one just the yellow one. Combination squares can wear in the slide mec. so avoid alloy bodys if it will see some good use, very useful for taking measurements from the wood as recommended by the woodwisperer. A good quality tape measure is also needed for odd...

clamp one hand use is the 'quick-grip' usually yellow. spade drills ok for odd jobs combination square good for depth and repeat measures. tilgear should have the quality required. My previous list is based on a mobile kit used for odd jobs i have done for various people, keeping the weight...

6'' quick-grip clamp japanese hammer japanese saw with pistol grip japanese flush cut saw two adjustable spanners fatmax bit adapter screwdriver bit set extra diamond coated bits as required pliers pincers twist drills spade drills combination square mortice gauge (pencil)...

http://cgi.ebay.co.uk/10-Sliding-table-saw-240-volts-excellent-condition_W0QQitemZ180488652184QQcmdZViewItemQQssPageNameZRSS:B:SRCH:GB:101 I purchased a pillar drill (very good) from the above and the seller has a good reputation.

The insulation on the floor is low priority just chip board is fine, also some savings can be made using expanded polystyrene with 11mm osb over in the walls use the good stuff in the roof or modify the ceiling as above .

I have the Axminster router lift in a Norm clone table.It makes it all very easy and quick with the router table, quite expensive but saves lots of temper recommended.

I just square the item to the holder with a small engineers square.

The thicknesser usually gives a better finish so plane the face as well .The edges to be glued should be square use the planer or table saw with fine blade. Cupping and movement on a wide panel can be a problem so glue a board that will cup up to one that will down and consider cutting into 4...

Have a look in ALDI two sanders last thurs may do as replacement.

Ok great this is the link that caught my eye . http://shop.ebay.co.uk/lilian3414/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p4340

Noticed turning blanks and tools on today.

I have the fox double and its fine no problems and runs true but its quite large so uses up bench or 'mobile' space .

Firefox -tools-add-ons, plugins- shockwave flash 10. find updates

Watched a program called reclamation on tv with a stone wall that had been pointed with cement it had blown and the stone delaminated . The recommendation was use lime putty to let it breath and remove the cement to minimise further damage.

Found this on google looks very complex but it may be the place to ask for info on your problem. http://forums.spybot.info/showthread.php?t=9190

Has a wire broken in the lead i have had this a number of times just cut and re terminate.To test pull each individual wire .

You may want to crop and improve photos then resize in software then upload.

I just got a new one from SIP and modified it did not cost a lot.

A few well placed screws with plugs to conceal can make quite a difference.Some of the screw pilot holes can also be injected with glue