Dabop's latest activity
Help Support UKworkshop.co.uk:
-
1) Set up a sacrificial fence at the back, to ensure proper support for the piece 2) zero clearance slot on the base. Alternatively... -
I’d hold 5 pieces together flat using parcel tape on the underside. The cubes would then be less likely to fly/easier to locate as they...
-
Your question goes in two directions. With the mitre saw, you do not say if the cuts are acceptable, only that the pieces disappear...
-
Not really a WIP, more like I took a few photos as I went along. I wasn't going to bother as it's only really a bit of domino joinery...
-
Dabop reacted to ChaiLatte's post in the thread Where can you buy drive belts for a table saw? with
Like.
And when you do determine the specification and length of the belt, write it down somewhere inside the machine so it can be seen by the... -
Welcome! And we already have at least 1 other Australian here, the legend that is @Derek Cohen (Perth Oz)
-
No restrictions as far as I’m aware, you’re all practically British anyway 😜. Just remember to turn all the images up the other way when...
-
In the 80's and 90's I was an AA patrol. I can remember one night going to a chap near to East Mids Airport, I can't remember the...
-
@Cabinetman mentions the way to go, it is how it is done in industrial plants where you have box trunking with drops to metalclad 13...
-
Lie it down before it falls down. Maybe on the back (spine). Get a wheeled dolly under each end like a piano mover would use. Those can...
-
I'm married to one. Her tied freezer bags are my nemesis, they undo the wrong way. Things get tidied from the right on shelves etc...
-
Chubber - you mentioning 'long-pockets' in dungarees/workpants and it reminded me of a time when a newly qualified 'Elf & Safety...
-
These are the ones I got, cheap enough for a punt in my book. https://www.aliexpress.com/item/1005004728561770.html...
-
Dabop replied to the thread Hex screwdriver bits?.I've got two sets of 'ToolPro' 4mm driver bits with manual handle and an extension in a little box, which I have found to be quite solid...
-
-
Dabop replied to the thread HELP I need a new desktop PC.Sadly something I am all too familiar with atm- apple stuff being the worst in that respect... Currently working on a bypass for an...
