Dabop's latest activity

Not worried about that really, more I was looking for options to control from inside the workshop with the dust collector outside.

Quite a few people run 'ducted' systems with gates and a single extractor- thats where the remote comes in handy- either just clip it to...

Note that most of the remotes default to off when they lose power anyway (only a very few have the 'memory' to revert back to their...

I removed the NVR switch and replaced it with a toggle switch and then used a commercial remote socket. I had to add a jumper wire to...

Actually I DID post them, back on page three... Don't need your diesel- got one of my own (although it and the petrol car are both...

What he said, plus if you can slow the blade down that'll help. I've used my tracksaw before because of the speed control. Too much...

If its normal perspex then band or table saw no problem as long as you keep it guided and firmly bedded down on the table as you cut, or...

Same here- I did my apprenticeship as an elec fitter and later added my auto elec ticket- and older vehicles WERE a killer if run in a...

Disagree means facts were presented that show mine were incorrect- if you or the others can't achieve that, then fine- but don't say 'we...

Short of supergluing your lips to the exhaust pipe and sealing your nostrils shut- NO car or building is that airtight that the oxygen...

So far, the ONLY person who has done so- is ME... You made the claim that your car/garage is so airtight that oxygen can't get in to...

You will be dead long before the oxygen in the air is reduced to where it won't support life... (I tend to be paranoid because I used...

I'm thinking there's a couple of candidates who seem unaware of those 'pesky' things called 'facts' and rather sprout off garbage...

I give up. You are obsessed with CO, which accounts for around 0.2% of the exhaust gas. The other 99.08% is a cocktail of gases none of...

I'm sure there's a Darwin Award in the making here :)