scrimper

Eric it is indeed a very impressive piece of work - although the one in your picture is not complete, if you look at the one on my...

Afraid I don't think too much of their recommendations - especially their choice of that Dremel moto saw as best for beginners! IMHO...

Is it the one with the tape wrapped around the top arm? Looks like it sold at £99 but it's now re-listed. As you say it's a bit odd -...

Is your model one of the cheap machines or a Pegas 'lookalike'?

My website has free plans to download- they are old fretwork plans from the original (pre 1968) Honnies company and the old (pre 1930's)...

Although your machine takes 6 1/2" coping saw blades I suspect it was intended for use with standard pinned scroll saw blades

I agree with what 'Whatnot' says - that your saw is designed to take standard pinned blades. The machine was available under many...

I would recommend you just remove the hold down and guard and just get used to holding the work down firmly. As mentioned elsewhere -...

There is a little image of the way the teeth should point in the side of the table in the clamp holding socket. The simple way to tell...

Well spotted and just about right. It is a Coronet Minor. I got it without any of the add ons apart from a grinding wheel that I don’t...

It is yet another clone of a cheaply made saw but with some extra embellishments to make it look prettier and better to use - which it...

I see that Lamb has answered your question admirably - may I suggest that you remove the hold down tool and guard thing completely, they...

Hugh am I right in thinking you have a Coronet major? It very much looks like one poking it's 'nose' into your images above. I have the...

I agree 100% about the blade touching the locking screw that is exactly correct. :) I hope you enjoy using your Hegner they are a...

Great. I have recently purchased a second hand Hegner Multicut 2S Variable Speed and am still learning the ropes. If you have any other...