Doug71

Not the prettiest option but you can get repair plates...

I think you are correct, hence my warning above to check the advert. When I originally posted this it appeared to be a very good buy...

If I was buying a site saw I would go for one of the Sawstops, they look good quality, well designed and the finger protection is a...

Well I went for a look at the property yesterday and the bathroom was absolutely running with condensation, still no heating on. The...

When the steam from the shower hits the cold air from an open window... it instantly turns the water vapor into water. It's why you end...

My experience is that a lot of Tenants dry their clothes indoors and wonder why it is damp. One of the things that seems to be missing...

The relevant Building Regs. is Part F. For a bathroom the minimum figure is 15 Lt/second. The calculation used is: How to calculate the...

I fitted an in line large motor fan in the attic at my old house, might help. But I would think the reason they are complaining about...

We recently had an inspection done regarding damp issues at our house ( a long and annoying saga ) and the guy tested our bathroom...

The fan needs to give 8 changes of air per hour. Calculate the volume of the room and choose the fan to suit. The fans installed in most...

My experience is that tenants who have lived with **** landlords in the past - have always been told that they should open the windows...

I think someone has made a bit of a mistake with the advert and if ordered you will only get the saw and MAKPAC case, the advert also...

Felder also do a version similar to Altendorf which they seem quite confident in......

The rubber strip on my 3m rail is probably about 1mm away from the blade but doesn't really seem to affect the cut quality, it's mainly...

As said air flow will help, a fan blowing over them should speed things up. Water based paint and linseed oil putty don't always play...