johnnyb

I’ve always found the Festool ones excellent the main one I use is the depth stop one which gives accurate repeatability...

I know and after spending loads on very inferior ones I ordered these(after using them for years) they arrived today from Japan. The...

Here's what I consider to be the very best countersink/counterbore and drill. These came from Japan.

It made me giggle as well.

There's a quite long video on you tube about using the PE. I recall it's a sort of zoom thing done by a club member, with other members...

There are companies who will make belts.

2 pack water based are as tough as the solvent based products. Undortuneatly there also as hazardous so take care.. acid cat pot life is...

I use a jig specifically for this on a us style saw(home made). My dw746 and a fine blade makes perfect cuts using stops so opposing...

I got lots of smooth plastic pipe and fittings with the extractor as a little used item. I see they are now really expensive. The blast...

My own thien baffle worked pretty well but it was with a 3 motor vac and only one machine, a saw this meant small chips/dust and high...

I've used an axminster trade at2000 1.5hp cyclone for years. The issues are the same for most of that style. The extraction drum is to...

Many many years ago I made one from cocobolo it was the sort with a sliding block sole. It's was pretty cool.

I use one and it's OK. I'd suggest a sensible max of 20mm. 25 degree blade relieves some pressure requirement

But without the staining it's still not a new floor. And never will be. Who thinks that any stain can be guaranteed to be 100% gone...

To uplift the floor, screed then refloor will cost loads way beyond what I imagine this guys charged. How would he know the exact...