graduate_owner

Thank you Fred48. It all happened SO quickly, I was lucky to get away with only one finger injured. I haven't taken a cavalier attitude...

Here's a tip which I used to ignore but not any more. When using a surface planer, never put a hand above the blades. I used to think -...

Greetings from West Wales K

I have not tried thee yet, but they might work...

Just to add my two pence worth - I bought a set of 8 Marples turning tools about 35 years ago. Carbon steel but still very useful and...

We have a Simba king size. The first one sagged after about 3 years so we had a replacement under guarantee. It did smell but only for...

Mine is a 3.6m one from Lidl / Aldi. It is surprisingly heavy, but needs to be because of the diameter of the lower tubes - they need to...

I have ha it for around 2 years I suppose - time seems to go very quickly these days. Just occasional use though. Anyway it seems it...

Totally off topic comments now. Never had kidney stones or gall stones fortunately, but I would like to make a comment about MM. It...

I tend to ask the question - are you open to offers? Then I take it from there. I often find people ask a bit more so they can come down...

I have a graduate (hence my name) and a denford viceroy, both ex schools. The graduate is cast iron throughout and is a heavy, rock...

The odd thing is, the disk rotates freely by hand when switched off. It rotates rapidly when switched on but with no load. If I put even...

Hi Donie, and thank you for that. I will certainly try it. I have looked at the online manual but there is no relevant information...

Hi guys, the model is BO6030. When I have it running upside down, it spins quite fast. WHen I put some pressure on the disk it slows...

Take a look on facebook marketplace. There are usually plenty of lathes offered for sale there. K