Please post your SS Gift here for all to see, this is an important part of the process.
SS GIFT VIEWING
- Thread starter Waka
- Start date
Help Support UKworkshop.co.uk:
Waka":ryfn5l8b said:
Well here's mine. Couldn't wait for morning - but did wait for Christmas Day! (The first gift I opened!)
I am so very pleased to receive this beautifully crafted and finished hex screwdriver and bits - bubinga (?) from Tony (Escudo).
This will be a real 'user' and will see lots of service in the workshop. It fits my hand perfectly.
Many thanks to Tony, a very thoughtful gift.
Attachments
mine is a wonderful turned carvers mallet- ideal because i have just started to buy a few carving tools and have nothing to hit them with.
head is lignum vitae and has wonderful creamy grain. The handle, i am not so sure on- could be ash, but there is a little bit of ray going through where it is quarter sawn- i have not seen this on ash before. lovely contrasting timber.
the maker remains a mystery, but whoever it is I am extremely grateful. goes without saying that it is almost too nice to use, but it will be used with pleasure.
Mark
head is lignum vitae and has wonderful creamy grain. The handle, i am not so sure on- could be ash, but there is a little bit of ray going through where it is quarter sawn- i have not seen this on ash before. lovely contrasting timber.
the maker remains a mystery, but whoever it is I am extremely grateful. goes without saying that it is almost too nice to use, but it will be used with pleasure.
Mark
Attachments
gasman
Established Member
I am truly stunned - opened this morning from PETE MADDEX - a stunning 5/8" fishtail chisel, marking knife and dovetail marker. Thank you sooo much I will yreasure them. Big hurdle to use them the first time as they are so nice
Thanks again Pete
Mark
Thanks again Pete
Mark
jimi43
Established Member
Since I'm working all day today, I was only allowed to bring my secret santa with me to open...the rest are for later.
What a fantastic surprise then to get this wonderful collection covering a large part of the serious woodturner's craft.
Firstly a superb screwdriver set..which will now take over from the mixed bag of turnscrews I tend to have randomly scattered in the darker parts of the cave!
Secondly a really dinky little sharpening steel...just perfect for a touch-up on the go.
And last but not least...a beautifully turned trinket dish but one with a difference. This one has a rare-earth magnet in the base so I can use this on both my mill and lathe...spot on for small parts I use when working in this area...and will replace the many Flora tubs I seem to have lying about and often knock over....
Part of the fun of the SS for me is the guessing who sent mine and this year was much more difficult...as they seem to have removed franking stamps from parcels! But a little bit of Sherlock and a sprinkling of Watson leads me to believe it was Simon!
Dear SS...if I'm wrong tell me!!! :deer
But whoever it was...your presents were spot on... and I am well chuffed! Thank you! 8)
Jim
What a fantastic surprise then to get this wonderful collection covering a large part of the serious woodturner's craft.
Firstly a superb screwdriver set..which will now take over from the mixed bag of turnscrews I tend to have randomly scattered in the darker parts of the cave!
Secondly a really dinky little sharpening steel...just perfect for a touch-up on the go.
And last but not least...a beautifully turned trinket dish but one with a difference. This one has a rare-earth magnet in the base so I can use this on both my mill and lathe...spot on for small parts I use when working in this area...and will replace the many Flora tubs I seem to have lying about and often knock over....
Part of the fun of the SS for me is the guessing who sent mine and this year was much more difficult...as they seem to have removed franking stamps from parcels! But a little bit of Sherlock and a sprinkling of Watson leads me to believe it was Simon!
Dear SS...if I'm wrong tell me!!! :deer
But whoever it was...your presents were spot on... and I am well chuffed! Thank you! 8)
Jim
rileytoolworks
Established Member
Holy Cow! I am so pleased with the gift I received.
I got a lovely card from my SS wishing me well in both my kitchen and tool making ventures, and opened the wrapping on the present to find this truly remarkable punch with which to mark my work.
This is without doubt one of the most thoughtful gifts I have received. Ever.
Thank you so much SS (please stand up and take a bow). If you don't want to reveal yourself on here, please PM me so I can say thank you properly.
It will be a treasured addition to my kit, and will help to push me forward with the business.
Thank you once again, and I have to say a big thank you to Waka for organising this again this year.
All the best, and Merry Christmas one and all.
Adam.
I got a lovely card from my SS wishing me well in both my kitchen and tool making ventures, and opened the wrapping on the present to find this truly remarkable punch with which to mark my work.
This is without doubt one of the most thoughtful gifts I have received. Ever.
Thank you so much SS (please stand up and take a bow). If you don't want to reveal yourself on here, please PM me so I can say thank you properly.
It will be a treasured addition to my kit, and will help to push me forward with the business.
Thank you once again, and I have to say a big thank you to Waka for organising this again this year.
All the best, and Merry Christmas one and all.
Adam.
Well, I'm extremely chuffed! Whoever sent my SS pressie has been paying attention on here and has been very generous indeed!
Back in July, there was a bit of discussion about an ingenious vice that Richard Arnold was using. It was identified as a 'Parrot Vice,' much favoured by carvers, guitar makers and anyone wanting a really flexible way of holding a workpiece. I'd said I was going to buy one but I haven't yet and now I don't need to as one has arrived in the post!!
It comes in a very heavy box and consists of two parts - a post which screws to the bench and a clamping part:
The clamp can be fitted on vertically like this
and also horizontally like this:
In use, you just clamp up the workpiece and this also tightens a cam onto the post, locking the whole thing up. Thus you can hold things at any angle:
I couldn't resist screwing it onto the bench to pose for these pictures, holding an offcut from my step chair project. One of my first projects in the new year will be an upgrade to my old chipboard bench, which was built as a quickie from scrap over 20 years ago; I will now be able to incorporate the parrot into the redesign.
And, as if that wasn't generous enough already, the box also contained a nice old brace, ready for re-use alongside some of its cousins:
So, many many thanks to my generous secret Santa - there was a big clue to your identity on the mailing label, so please take a bow JamesC!!
Back in July, there was a bit of discussion about an ingenious vice that Richard Arnold was using. It was identified as a 'Parrot Vice,' much favoured by carvers, guitar makers and anyone wanting a really flexible way of holding a workpiece. I'd said I was going to buy one but I haven't yet and now I don't need to as one has arrived in the post!!
It comes in a very heavy box and consists of two parts - a post which screws to the bench and a clamping part:
The clamp can be fitted on vertically like this
and also horizontally like this:
In use, you just clamp up the workpiece and this also tightens a cam onto the post, locking the whole thing up. Thus you can hold things at any angle:
I couldn't resist screwing it onto the bench to pose for these pictures, holding an offcut from my step chair project. One of my first projects in the new year will be an upgrade to my old chipboard bench, which was built as a quickie from scrap over 20 years ago; I will now be able to incorporate the parrot into the redesign.
And, as if that wasn't generous enough already, the box also contained a nice old brace, ready for re-use alongside some of its cousins:
So, many many thanks to my generous secret Santa - there was a big clue to your identity on the mailing label, so please take a bow JamesC!!
speeder1987
Established Member
I just opened my gift and was truly staggered by the beautiful box I received! As decribed by tony the box is made from Masaranduba, with the trays made from ash. The veneer on top is ash, Eucalyptus burr, maple and black dyed sycamore. I don't think the pictures do it justice at all
Push fit compartments inside
A picture of the inlay:
All I can say is a big thank you to Andy, what a beautiful gift and for your generosity
Have a good Christmas everyone
John
Push fit compartments inside
A picture of the inlay:
All I can say is a big thank you to Andy, what a beautiful gift and for your generosity
Have a good Christmas everyone
John
Merry Christmas forum friends.
Thanks Secret Santa for your very useful and interesting gift. A moisture meter.
I must confess that I have not used one of these gadgets before, although I'm sure it will be handy. I will have to do a bit of detective work to find my Santa, the post mark on the package should provide a clue.
I am pleased you liked your screwdriver Liam, made from a small piece of Bubinga. I will give you a shout for a pint when I next find my way down to Swanage, maybe in the summer. An afternoon at the Square and Compass would be something to look forward to.
Best wishes to all, and thanks Tony for your efforts in organising this worthwhile and exciting event.
Tony.
Thanks Secret Santa for your very useful and interesting gift. A moisture meter.
I must confess that I have not used one of these gadgets before, although I'm sure it will be handy. I will have to do a bit of detective work to find my Santa, the post mark on the package should provide a clue.
I am pleased you liked your screwdriver Liam, made from a small piece of Bubinga. I will give you a shout for a pint when I next find my way down to Swanage, maybe in the summer. An afternoon at the Square and Compass would be something to look forward to.
Best wishes to all, and thanks Tony for your efforts in organising this worthwhile and exciting event.
Tony.
Thanks for posting your SS Gifts, the standard of work this year is absolutely outstanding, and the presents that have been bought are really good.
This is what the forum is all about, great friends, great knowledge and great SS Gifts. When I see this it really makes the organising worthwhile.
Thanks Guys and Girls.
Oh I'm still monitoring to see if you've posted.
This is what the forum is all about, great friends, great knowledge and great SS Gifts. When I see this it really makes the organising worthwhile.
Thanks Guys and Girls.
Oh I'm still monitoring to see if you've posted.
well I was completely blown away by my present, and took an extra moment to photograph and share the workmanship
not only this but how anyone could know how much I needed these specific tools beats me - I know a pencils not accurate enough, but just kept sharpening and sharpening.....
so, thank you Santa - an please feel free to take a bow for your stunning work =D>
not only this but how anyone could know how much I needed these specific tools beats me - I know a pencils not accurate enough, but just kept sharpening and sharpening.....
so, thank you Santa - an please feel free to take a bow for your stunning work =D>
Attachments
James C
Established Member
I've been lurking on here a little while checking out what everyone has been receiving. I have decided to show my generous SS gift through iPhoneography having recently learnt how to take decent photos, edit them and upload them all from my phone.
I hope these pictures do justice to an excellently made screwdriver set which I have already put to use. The box that stores the insert bits is exceptionally well made and has two tiny magnets in the lid to lock everything in place.
I am well chuffed!
I now need to hone my skills so I can make something next year.
I hope these pictures do justice to an excellently made screwdriver set which I have already put to use. The box that stores the insert bits is exceptionally well made and has two tiny magnets in the lid to lock everything in place.
I am well chuffed!
I now need to hone my skills so I can make something next year.
Attachments
Aces and Eights":11gjks5u said:
I thought SS was supposed to be secret but it seems everyone else knows who sent what so I may as well own up. I must confess that I didn't make it though, that credit belongs to Iain at http://www.spanglefish.com/metalstamps/index.asp . Faced with the challenge of making a tool for someone who is making a living from making tools I folded and resorted to buying.
Anyway, here's mine.
Thanks to speeder1987 for a rather nice scrub plane. I'll post up some action photos as soon as the inlaws clear off. I've got a pile of rough timber that I've been saving for such a tool.
Happy New Year
Attachments
Jamesc
Established Member
adidat
I will not buy anymore tools...
hi guys, must apologise for me delay in posting, and plumbing disaster on Christmas day and other problems and kept me very busy. Onwards...
well I was gob smacked to receive this beautiful plane.
it is in amazing condition considering it is probably 200 years old, I'm unaware of this maker could someone check in British plane makers for some more info? :---) :mrgreen:
I'm not sure what the timber is but the grain is stunning!
with a boxwood mouth piece
the work that has gone into this is immense
a nice antique iron!
the sole
to say i was pleased is an understatement i think for once my face really did look like this! :mrgreen:
thank you very much Richard i will treasure this!
a very pleased adidat!
well I was gob smacked to receive this beautiful plane.
it is in amazing condition considering it is probably 200 years old, I'm unaware of this maker could someone check in British plane makers for some more info? :---) :mrgreen:
I'm not sure what the timber is but the grain is stunning!
with a boxwood mouth piece
the work that has gone into this is immense
a nice antique iron!
the sole
to say i was pleased is an understatement i think for once my face really did look like this! :mrgreen:
thank you very much Richard i will treasure this!
a very pleased adidat!
SS have really produced/sourced some amazing gifted, keep it up folks, there are still some that haven't posted.
Remember I'm watching and recording.
Remember I'm watching and recording.
Sorry for the late posting. I've hardly been home over christmas and then I had some orders to do.
Pete - I'm really pleased you liked your pen.
Thank you to Adam for the lovely gift and card I received. My santa had done his research and gave me a book on making all sorts of different types of dolls houses and also a handmade marking gauge which is a much better design than the standard ones and I know I'll get lots of use from it. Is the wood zebrano? It's got lovely markings though I don't think it's showed up that well in the photos.
They are both lovely gifts and I really appreciate them so thank you Adam.
Pete - I'm really pleased you liked your pen.
Thank you to Adam for the lovely gift and card I received. My santa had done his research and gave me a book on making all sorts of different types of dolls houses and also a handmade marking gauge which is a much better design than the standard ones and I know I'll get lots of use from it. Is the wood zebrano? It's got lovely markings though I don't think it's showed up that well in the photos.
They are both lovely gifts and I really appreciate them so thank you Adam.
