JR147
Established Member
Over the 4 day weekend I planned to build a mobile base for my MFT table with storage. So I made sure before Friday I had all the plywood I needed, some edgebanding etc. I even bought an edgebanding end trimmer and normal trimmer to make life easier. I knew I had plenty of glue and screws so I was all set.
Over the last day or so I've finalised the design, cut all the wood to size, cut out various slots and holes for cables, and applied edgebanding. Really solid progress, but to make construction easier I decided to use pocket hole screws, so I spent a fun hour drilling pocket holes.
I thought I'd get a couple of sides glued and screwed before calling it a day. Got everything ready to go and reached for the box of pocket hole screws. There's about 10 left in the box, and most shops that sell them are shut tomorrow.
Standard bank holiday **** up!
Over the last day or so I've finalised the design, cut all the wood to size, cut out various slots and holes for cables, and applied edgebanding. Really solid progress, but to make construction easier I decided to use pocket hole screws, so I spent a fun hour drilling pocket holes.
I thought I'd get a couple of sides glued and screwed before calling it a day. Got everything ready to go and reached for the box of pocket hole screws. There's about 10 left in the box, and most shops that sell them are shut tomorrow.
Standard bank holiday **** up!