Startrite 352
- Thread starter Tusses
- Start date
Help Support UKworkshop.co.uk:
Oryxdesign
Established Member
I was looking at that too, but it was too far away.
ok - so not as good as I hoped 
I guess I was lucky with the AGS !
it will need some TLC as it has been neglected.
The motor struggles to get going (maybe the cap ? )
the blade was blunt and triped the overload trying to resaw some 5" oak.
the NVR doesn't work - as I reset the trip (yellow box in photo) the motor started back up
The door interlocker doesn't disconnect the power when you open the door
the foot brake doesn't disconnect the power
I've had the manual emailed to me from 'the other place' , so I can get to wiring it up correctly and put it back how it once was !
some pics ...
I guess I was lucky with the AGS !it will need some TLC as it has been neglected.
The motor struggles to get going (maybe the cap ? )
the blade was blunt and triped the overload trying to resaw some 5" oak.
the NVR doesn't work - as I reset the trip (yellow box in photo) the motor started back up
The door interlocker doesn't disconnect the power when you open the door
the foot brake doesn't disconnect the power
I've had the manual emailed to me from 'the other place' , so I can get to wiring it up correctly and put it back how it once was !
some pics ...
paulm
IG paulm_outdoors
Hi Tusses,
Whereabouts on the machine is the yellow box with the reset switch ?
That may be what has tripped on my 351s model at the weekend, but haven't got any yellow box or similar as far as I recall so not sure where a reset would be !
Once you've got your machine sorted I'm sure you'll be pleased, they are great workhorses.
Must have cut up tons of logs on my mine for planking and turning blanks in the last few years and no problems till the weekend !
Cheers, Paul
Whereabouts on the machine is the yellow box with the reset switch ?
That may be what has tripped on my 351s model at the weekend, but haven't got any yellow box or similar as far as I recall so not sure where a reset would be !
Once you've got your machine sorted I'm sure you'll be pleased, they are great workhorses.
Must have cut up tons of logs on my mine for planking and turning blanks in the last few years and no problems till the weekend !
Cheers, Paul
