Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
If you have a spindle without very useful feature of tilt it can be overcome with readily available blocks, which is the solution I have. I have two heads to resolve the issue, first is a variable angle head, this takes standard carbide cutters and allows infinite variability of cut plus and minus 90 degrees from the vertical.[ATTACH=full]176840[/ATTACH]The second block allows me to tilt cutters 30 degrees, now this isn’t as flexible as a tilting head spindle and does require me to have in most instances custom made cutters to my own design of profile. However, custom cutters are not that expensive.[ATTACH=full]176841[/ATTACH]
If you have a spindle without very useful feature of tilt it can be overcome with readily available blocks, which is the solution I have. I have two heads to resolve the issue, first is a variable angle head, this takes standard carbide cutters and allows infinite variability of cut plus and minus 90 degrees from the vertical.
[ATTACH=full]176840[/ATTACH]
The second block allows me to tilt cutters 30 degrees, now this isn’t as flexible as a tilting head spindle and does require me to have in most instances custom made cutters to my own design of profile. However, custom cutters are not that expensive.
[ATTACH=full]176841[/ATTACH]
