Hi all.
I've decided that I haven't room for this fantastic machine in my small workshop. I have had it from new for about 2 months. It is a nice powerful machine, perfectly suited to the smaller workshop. Below are the specs from the Axminster site, together with a number of photo's i've taken.
Model
JPT-260
Cuts per Minute
1,590/min
Cutterblock Diameter
70mm
Cutterblock Speed
5,300rpm
Dust Extraction Outlet
100mm
Feed Speed
5.5m/min
Knives
HSS(Resharpenable) x 3
Max Depth of Cut
Planer 3mm, Thicknesser 4.5mm
Max Planing Width
256mm
Max Thicknesser Capacity
225mm
Nett Weight
172kg
Overall L x W x H
1,163 x 527 x 1,110mm
Power
Input 2.65kW
Rating
Trade
Length of Table
1,120mm
Input Power S6 40%
2.6kW
Output Power S6 40%
1,700W
Small mark on the front of the casing
With delivery this would set you back £1048 from Axminster. I would like £700, and I can arrange for the machine to be palletised and sent on - estimated cost for delivery is £75.
Any interest via PM please.
Cheers
Karl
I've decided that I haven't room for this fantastic machine in my small workshop. I have had it from new for about 2 months. It is a nice powerful machine, perfectly suited to the smaller workshop. Below are the specs from the Axminster site, together with a number of photo's i've taken.
Model
JPT-260
Cuts per Minute
1,590/min
Cutterblock Diameter
70mm
Cutterblock Speed
5,300rpm
Dust Extraction Outlet
100mm
Feed Speed
5.5m/min
Knives
HSS(Resharpenable) x 3
Max Depth of Cut
Planer 3mm, Thicknesser 4.5mm
Max Planing Width
256mm
Max Thicknesser Capacity
225mm
Nett Weight
172kg
Overall L x W x H
1,163 x 527 x 1,110mm
Power
Input 2.65kW
Rating
Trade
Length of Table
1,120mm
Input Power S6 40%
2.6kW
Output Power S6 40%
1,700W
Small mark on the front of the casing
With delivery this would set you back £1048 from Axminster. I would like £700, and I can arrange for the machine to be palletised and sent on - estimated cost for delivery is £75.
Any interest via PM please.
Cheers
Karl
