Peanutcoxy
Established Member
Hi everyone, I’m after a router table to fit my DeWalt DW625E. Alternatively, happy to buy a used one with a router attached. Will only be using it for profile routing around templates and for bevels.
-
If you have bought, sold or gained information from our Classifieds, please donate to UK Workshop and give back.
You can become a Supporting Member or just click here to donate.
Wanted Router table
- Thread starter Peanutcoxy
- Start date
Help Support UKworkshop.co.uk:
Lots of info on these threads, you may be better off either making your own or partially making your own as it seems the fence is not going to be to important.
People have used kitchen worktop to make table tops, a router cut out guide here AUKTools Router Insert Plate Template and a 3/4 bearing guided cutter. You don't state any budget, these things can get pricey depending what you go for.
People have used kitchen worktop to make table tops, a router cut out guide here AUKTools Router Insert Plate Template and a 3/4 bearing guided cutter. You don't state any budget, these things can get pricey depending what you go for.
Alexam
Bandsaw Boxmaker
I mounted a new Triton TR101 into a kitchen table top, which hangs vertically in front of my workbench. Has a clamp on guide than holds an extractor pipe and I connect with a vac, Location West Midlands and hardly used. I thought I would have loads of use for it but like a few other things, did not think it through enough. Selling it if interested.
Last edited:
Jbonevia
Established Member
I have a Trend CRT Mk3 I'm thinking of selling if interested, postage may be prohibitive though.
Chief Sawdust Maker
Darren
I have a Ryobi 1/4" mounted in a Ryobi aluminium table The router can be used out of the table
Complet with all the original guides spanners etc
The table is mounted on a board and has a small scissor lift under it for height adjustment
It also has an NVR switch its had some use but all stll works
It surplus to requirements and sat gathering sawdust under a bench
I am in Worcester just off the M5 so you could collect
Complet with all the original guides spanners etc
The table is mounted on a board and has a small scissor lift under it for height adjustment
It also has an NVR switch its had some use but all stll works
It surplus to requirements and sat gathering sawdust under a bench
I am in Worcester just off the M5 so you could collect
Robbo3
Established Member
Hi,
I have a folding router table 27" x 20", with a little used Hitachi M12V router.
£150. I,m just outside Witney so you are close enough to pop over & have a look if you are interested.
I can send you a couple of photos to see if it's what you want before traveling.
I have a folding router table 27" x 20", with a little used Hitachi M12V router.
£150. I,m just outside Witney so you are close enough to pop over & have a look if you are interested.
I can send you a couple of photos to see if it's what you want before traveling.
If you want a cheap thing, I've got a performance power table (NVR Etc) that could do with tidying up. Table surface isn't pristine!! I'm clearing space - so it's going cheap - how about £30? Collection from BS37 8QN if you're interested.
I have some parts for sale that may help, you would have to redrill for the 625 though.
https://www.ukworkshop.co.uk/threads/kreg-router-plate-and-inserts.137148/
All you would need is a length of kitchen worktop, cut out the hole for the plate which does not need to be steped and fit the corner blocks on which the plate sits and can be adjusted for level.
https://www.ukworkshop.co.uk/threads/kreg-router-plate-and-inserts.137148/
All you would need is a length of kitchen worktop, cut out the hole for the plate which does not need to be steped and fit the corner blocks on which the plate sits and can be adjusted for level.
StephenArfer
Established Member
I have a Trend WRT router table complete with all accessories. The DW625E fits directly. I had it on Ebay and it sold for £150, but the buyer is having problems with transport and may have to back out. He has until this Friday 2nd September to complete. So, it might well become "re-available" then. You can see full details on the Ebay entry.
