Router Bit Help Needed

[Johnathan]

I am building bee-hives and potentially will be building a lot. I want to use through-dovetail on the corners on the boxes for strength. I have two dovetail jigs and both combs so both tongue and socket jig-cuts can be permanently set up once I have the necessary router bits. I am working on 3/4" board. I have the straight-cut 3/4" deep cut 1/2" diameter bit with 1/4" shank. My problem is sourcing a dovetail bit of the right specification. I need (preferably in the UK) a similar specification to the above but with a 14 degree dovetail cut. I am struggling to find one. Can anyone point me in the right direction?
Many thanks in anticipation.

Johnathan

 

[Roughcut]

I don't know anything about dovetail jigs and cutters, but would this be suitable?:
http://www.axminster.co.uk/axcaliber-do ... s-ax801216

 

[Glynne]

Have a look at http://www.wealdentool.com/acatalog/Online_Catalogue_Dovetail_122.html

 

[MikeJhn]

Have a look here: http://www.axminster.co.uk/search/?q=Ro ... %20bits&nR[visibility_search][=][0]=1&

My second suggestion would have been Wealdontool, but Glynne beat me to it.

Your problem is going to be finding what you want in 1/4" shank, plenty available in 1/2".

Mike

 

[PAC1]

CMT do a very large selection of dovetail cutters