Reply to thread

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message

I started to suggest this too Richard and then stopped because I think John is talking about only one spot...and that should be solved by just knocking it off or maybe grinding a tad below the surface to get the flat back again.

Whilst rubbing the whole back through the emery flattening process will undoubtedly work...I think it is probably a bit extreme for this occasion and would warrant progressive work through the grits to get the flat back again..with all the inherent dangers we know that can result very easily.

If you could just grab a shot John, I think we can give better advice on this specific problem.

Jim

<blockquote data-quote="jimi43" data-source="post: 684929" data-attributes="member: 5858">I started to suggest this too Richard and then stopped because I think John is talking about only one spot...and that should&nbsp; be solved by just knocking it off or maybe grinding a tad below the surface to get the flat back again.Whilst rubbing the whole back through the emery flattening process will undoubtedly work...I think it is probably a bit extreme for this occasion and would warrant progressive work through the grits to get the flat back again..with all the inherent dangers we know that can result very easily.&nbsp; <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite10" alt=":oops:" title="Oops!&nbsp; &nbsp; :oops:" loading="lazy" data-shortname=":oops:" /> If you could just grab a shot John, I think we can give better advice on this specific problem.Jim</blockquote>

[QUOTE="jimi43, post: 684929, member: 5858"] I started to suggest this too Richard and then stopped because I think John is talking about only one spot...and that should be solved by just knocking it off or maybe grinding a tad below the surface to get the flat back again. Whilst rubbing the whole back through the emery flattening process will undoubtedly work...I think it is probably a bit extreme for this occasion and would warrant progressive work through the grits to get the flat back again..with all the inherent dangers we know that can result very easily. :oops: If you could just grab a shot John, I think we can give better advice on this specific problem. Jim [/QUOTE]

Verification